Log:
Évaluations - 5, GPA: 4 ( )

Instructions Electrolux, Modèle 56800

Fabricant : Electrolux
Taille : 622.04 kb
Nom Fichier : 1aec59ca-34da-415e-b7c6-1d42d9bcc438.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Recommendation: Remove textiles immediately after drying. Special programme, lasting around 35 minutes, for refreshing or gently cleaning textiles with commercially available dry cleaning sets. REFRESH 1kg • • - (Only use those products which are declared as suitable for the drier by the manufacturer; please observe the manufacturer’s instructions for use.) 2) Press the SPECIAL CARE button! Drying Switching machine on / switching light on Turn the programme selector to any programme or turn it to LIGHT. The machine has been switched on. When the door is opened, the drum is illuminated. Opening loading door / loading laundry 1.Open loading door: Push against the loading door (push point ) 2.Load your laundry (do not force it in/overload the machine). 1 Caution! Be careful not to trap laundry in between the loading door and rubber seal. 3.Close loading door securely. Lock must audibly lock. Selecting the programme Use the programme selector to set the programme you require. Selecting additional functions If required, press the AUDIBLE SIGNAL, SPECIAL CARE or SENSITIVE buttons. AUDIBLE SIGNAL When the drying cycle has finished, an intermittent audible signal will sound. SPECIAL CARE For especially gentle drying of sensitive fabrics with the l care label and for temperature-sensitive textiles (e.g. acrylic, viscose). Programme is executed with reduced heat. SPECIAL CARE is only suitable for use with loads of up to 3kg! SENSITIVE For gentle drying of frequently-worn textiles. Programme starts on full heat setting, which is then reduced towards the end of the programme to ensure gentle care of laundry. 3 SPECIAL CARE and SENSITIVE cannot be selected together. Setting time delay 3 The DELAY TIMER button allows you to delay the start of a programme by 3, 6 or 9 hours. 1.Select the programme 2.Press the DELAY TIMER button as many times as necessary until the required display is illuminated: – 9h display for programme to start in 9 hours. – 6h display for programme to start in 6 hours. – 3h display for programme to start in 3 hours. 3 By pressing the DELAY TIMER button again, the time delay is cancelled. The display goes out. 3.To activate the delay timer, press the START/PAUSE button. Note: If a time delay of 9 hours is selected, the display 9h is illuminated. After 3 hours, the display will jump round and 6h will be illuminated; after another 3 hours, 3h is illuminated. After a total of 9 hours, the programme will start. Starting the programme Press the START/PAUSE button. The programme is started. The programme progress display show drying progress. Changing programme To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to OFF and then reset the programme. 3 The programme can no longer be changed directly once the programme has started. If nevertheless there is an attempt to change the programme on the programme knob, the programme progress display and the maintenance indicators flash. If an option button (excluding the AUDIBLE SIGNAL button) is pressed, the corresponding indicator flashes several times. The drying programme is not however affected by this (laundry protection). Removing laundry or loading laundry when necessary 1.Open loading door 1 Warning! Laundry and drum can become hot. Risk of burns! 2.Load or remove laundry items. 3.Close the door securely. Lock must audibly lock. 4.Press the START/PAUSE button to continue the drying cycle. Drying cycle complete / removing laundry Once the drying cycle is complete, the END and CREASE GUARD displays light up. If the AUDIBLE SIGNAL button has been pressed, an audible signal sounds intermittently. 3 The drying cycle is automatically followed by a crease guard phase which lasts around 30 minutes. The drum rotates in intervals during this phase. The laundry thereby remains relaxed and free of creases. The laundry can be removed at any time during the crease guard phase. (The laundry should be taken out towards the end of the crease guard phase at the latest to prevent creases from forming.) 1.Open loading door 2.Before removing the laundry, remove lint from the micro-fine filter. It is best to use a damp hand for this purpose (refer to “Cleaning and main tenance” section). 3.Remove laundry. 4.Turn the programme selector to OFF. Important! After each drying cycle – clean the micro-fine filter and fine strainer, – drain the condensate tank (refer to the “Cleaning and maintenance” section). 5.Close loading door. 15 Cleaning and maintenance Cleaning lint filter To ensure that the dryer works efficiently, the lint filters (micro-fine filter and fine strainer) must be cleaned after every drying cycle. 1 Caution! Never operate the dryer without fluff filters or with damaged or blocked fluff filters. 1. Open door 2. Use a damp hand to clean the micro- fine filter, which is built into the lower part of the loading aperture. 3. Push down unlock button on large mesh filter. Large mesh filter elevates. 4. ...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories