Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
E .... 8 ................................... 3 USER INFORMATION AND INSTRUCTIONS FOR USE & MAINTENANCE We have made every effort to ensure that the information given in this catalogue is accurate, but our policy of continuous product development means specifications are likely to change and such information is for guidance only. Martindale will not accept liability for any loss, damage or consequential loss arising from information contained herein. Your statutory rights will not be affected. Before using your Max helmet it is essential that you study the following instructions. Special attention must always be given to the warnings, capabilities and maintenance requirements stated herein, and to any labelling specific to your model. Martindale will accept no liability for damage occurring: 5 in connection with unprofessional use and/ or maintenance of the product, including use for the purposes other than those for which it is intended 5 due to failure to observe the instructions given in this manual 5 in connection with repairs to the safety product that were not carried out by or on behalf of our company Technical Specification Technical Specification Helmet weight (approximate) Miner P1 1100g Integra P2 1250g Integra Intrinsically Safe P2 1400g Battery Mounting external waist mounted within helmet within helmet Battery Type Lead acid Certified to: EN50033 NiMH NiMH Battery Duration (hours) 12 10 8 Intrinsically Safe Yes ATEX Certified to: EN50033 EN50014 EN50303 EN50020 EEx ia I M1 No Yes ATEX Certified to: EN50014 EN50284 EN50020 EEx ia IIBT3 1G Non-Mining EEx ia I M1 Mining Usage areas Mining Environments Dust Environments requiring an integrated unit Dust Environments requiring an integrated unit + for use in potentially explosive atmospheres Size All helmets fit head sizes from 51 - 62 cm Respiratory Protection (EN146) THP1 THP2 THP2 Nominal Protection Factor 10 20 20 Part No’s E100 E145 E140IS Product Options Variations of the basic model are also available. Helmets are available with ear defenders but also with ear defenders and Centurion Connect Clips fitted to the side of the shell to enable the user to fit Centurion carriers, face screens shields for various applications. With Ear Defenders With Ear Defenders and Connect Clips Integra P2 E140 E140C P2 Intrinsically Safe E140ISE E140ISEC Face Protection Withstand impact - Class B EN166 Polycarbonate screens will withstand temperatures of up to + 190°C Head Protection EN397 Flow rate testing of your Max helmet Prior to each use of your helmet, please check the manufacturers minimum design flow rate using the Max test flow indicator which is provided with your Max helmet. The indicator can also be purchased separately (part number E305). Full instructions are provided within the test device package. If the flow rate is not sufficient ensure that you: . Check the filter by replacing it with a fresh one . Check the battery is fully charged . If the flow rate is still insufficient, return your helmet to your nearest agent or to the manufacturer It is important that the correct flow rate is achieved when using your Max respiratory unit. Note: Ensure the helmet is free from visible damage e.g. holes and cracks, etc. Use only Martindale replacement parts. Martindale Certified Accessories and Replacement Parts List Part No. Description Part No. Description E200 Filter standard P2 particulate (Suitable for Miner P1, Integra P2 & Integra IS P2) E201 Filter odour P2 particulate and nuisance odours ( Suitability as per E200) E210 P1 Visor anti-scratch E225 Headband cradle & pad kit E210L P1 Long Visor anti-scratch E230 Hygiene kit for Ear Defenders E211 P1 Visor anti-mist E235 Pair of Ear Defenders E211L P1 Long Visor anti-mist E240 Chinstrap - nylon E212 P2 Visor anti-scratch E241 Chinstrap - leather E213 P2 Visor anti-mist E245 Plug cover E220 P1 Head Seal Kit E246 Reflective kit E221 P2 Head and Face Seal Kit E300 Miner Helmet Airflow Test Kit E305 Integra Helmet Airflow Indicator E310 Oldham cap lamp & battery (certified E345 Charger for all Integra models (10 hour Battery) E350 Oldham charger E360 Fuse pack (10 of) E370 Fuse resistor link for cap lamp used on Miner helmet Face Seal Face Seal Sweatband To remove Lift the sweatband off the retaining pips by stretching until it becomes free. To replace Gently stretch the sweatband over the retaining pips, locating the pips through holes in the sweatband and taking care not to damage the material. Ensure that the new sweatband is securely in place. Chinstrap To remove With the ear defenders retracted gently pull one end of the chinstrap until it becomes free. Repeat for the other end. To replace With the ear defenders retracted, holding bracket on end of chinstrap push retainer pip through hole underneath face seal on strongring, snap into place. Repeat for the other end. Cleaning The helmet and all it’s parts should only be cleaned with warm water and a soft cloth. Do not use organic solvents. Do not attem...