These are typically used on the power input side of the device to be protected. An isolation transformer can protect equipment from a ground fault or other malfunction of nearby equipment, as well as attenuate harmful harmonics and transients on the input power. A..4 Appendix A A..4 Appendix A Jogging Operation Usually done manually, a jog command from an operator’s panel requests the motor/drive system to run indefinitely in a particular direction, until the machine operator ends the jog operat

Revision content Date of issue Manual code 1 First edition Octover 2007 NTS204X - The current edition of this Instruction Manual also includes some corrections of simple misprints, missing letters, misdescriptions and certain added explanations other than those listed in the above Revision History table. Table of contents Chapter 1 Investigation of the inverter 1.1 Spesification label(Model name,manufacturing number:MFG) ················································1 - 1 1.1.1 Model name, ···

Spec Tech Industrial 203 Vest Ave. Valley Park, MO 63088 Phone: 888 SPECTECH Email: sales@spectechind.com i i Safety Messages For the best results with the X200 Series inverter, carefully read this manual and all ofthe warning labels attached to the inverter before installing and operating it, andfollow the instructions exactly. Keep this manual handy for quick reference. Definitions and Symbols A safety instruction (message) includes a “Safety Alert Symbol” and a signal word orphrase such as WA

Revision Contents The Date of Issue Operation Manual No. 1 Japanese font was removed. Nov. 2000 NBS611BX 2 The specification of the capacity 75-132kW and more was added. Mar. 2001 NBS611CX Table of contents 1. Investigation of the inverter 1.1Specification label(Model name , Manufacturing number ; MFG) 1.1.1 Model name......................................................... 1-1 1.1.2 MFG number........................................................ 1-1 1.2Inverter specification 1.2.1 SJ300 ...

(if b120(brake control switch) was preset “01”) Is the brake working ON/OFF Preset B124 too short Brake signal/connection OK Option board 1 error 0–9 Detection of connected option card 1. For more details, refer to the instruction manual of the card. Make sure the connection of the card 1 Make sure if the usage is proper Option boad 2 error 0-9 Detection of connected option card 2. For more details, refer to the instruction manual of the card. Make sure the connection of the card 2 Make sure if