Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
PARENTAL PARENTAL LEVEL ALL 4 Enter your four-digit password then press ENTER. 5 Press Arrow (K/L) to select PARENTAL LEVEL, then press ENTER. 6 Press Arrow (K/L) to select the desired level. 7 Press SETUP to exit NOTES .When doing this for the first time, enter any 4 digits. (except for 4737) That number will be used as the password from the second time onward. .To change the password, press Arrow (K/L) to select CHANGE at step 5, then press ENTER. Enter the four-digit pass-word, then press ENTER. .With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set. .Record the password in case you forget it. CONTROL LEVELS .ALL All parental lock is cancelled. .Level 8 DVD software of any grade (adult/general/children) can be played back. .Levels 7 to 2 Only DVD software intended for general use and children can be played back. .Level 1 Only DVD software intended for children can be played back, with those intended for adult and general use prohibited. IF YOU FORGET THE PASSWORD 1 Press 4, 7, 3, 7 at step 4. Then enter your new password. .Password will be cleared and parental level will be set to ALL. 2 Proceed the above Steps 5-7 again. – –––28 282828– ––– EN 0C28 TROUBLESHOOTING GUIDE If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the player, consulting the following checklist. Problem Corrective Action No power. • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. The TV/DVD does not respond to the remote control. • Check if the power plug is connected to an AC outlet. • Check the batteries in the remote control. • Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote. • You have to be within 23 feet of the TV/DVD. • Check if the correct mode is selected. If not switch the mode by pressing SELECT on the remote control,whichever you need. TV Mode Problem Corrective Action No Picture or Sound • Try a new channel, if OK, then possible station trouble. • Make sure the power is turned on. • Press SELECT on the remote control to select TV mode. Then try other TV feature. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. Bars On Screen • If outside antenna is being used, check for broken wire. • Check for local interference. Picture Distorted or Blurred • Try a new channel, if OK, then possible station trouble. • If outside antenna is being used, check for broken wire. Picture Rolls Vertically Lines or Streaks in Picture • Try a new channel, if OK, then possible station trouble. • If outside antenna is being used, check for broken wire. • Check for local interference. No Color • Try a new channel, if OK, then possible station trouble. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. • Adjust COLOR control. Poor Reception on Some Channels Ghosts in Picture • Try a new channel, if OK, then possible station trouble. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. • Check for local interference. Weak Picture • Try a new channel, if OK, then possible station trouble. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. • Adjust CONTRAST & BRIGHT control. Sound OK, Picture Poor • Try a new channel, if OK, then possible station trouble. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. • Check for local interference. • Adjust CONTRAST & BRIGHT control. Picture OK, Sound Poor • Try a new channel, if OK, then possible station trouble. • Check for local interference. Different color marks on screen. • Magnetism from nearby appliances and geomagnetism might affect the color of the TV picture. Move the TV/DVD away from the appliances, the TV/DVD can repair itself automatically. If you want to repair immediately, unplug the TV/DVD power cord, then plug it in again 30 minutes or so later. – ––––29 29292929– –––– EN 0C28 DVD Mode Problem Corrective Action No picture. • Connect the video cables firmly. • Insert a correct video disc that plays on this TV/DVD. • Press SELECT on the remote control to select DVD mode. Next, press PLAY or OPEN/CLOSE. Then, try other DVD feature. Disc cannot be played. • Insert the disc. • Clean the disc. • Place the disc correctly, with the label side up. • Cancel the parental lock or change the control level. No sound. • Connect the audio cables firmly. • Turn the power of the audio component on. • Correct the audio output settings. • Correct the input settings on the audio component. No DTS audio is output. • This TV/DVD does not support DTS audio. This is not a malfunction. Distorted picture. • The...