Évaluations - 3, GPA: 4.3
(
)
)
|
Photos et spécifications Hyundai H-LCD3700 |
Facilité d'utilisation
If you move this product with the power cord or the connection cable connected, the damaged power cord, connection cable or connection terminal may cause the fire, the electric shock or breakdown. • 2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it may damage it. Other objects To ensure not to get an electric shock or short circuit, please do not spill liquid or other objects into the ventilation holes of the product. Caution: Do not stand on the LCD TV, do not push LCD TV or its’ stand. Keep it away from children. Heating The temperature of the product’s body becomes a little higher after a long period use. This phenomenon indicates about heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch. Note: All the OSD and illustrations in this manual may be somewhat different from the actual situation. Please take the LCD Color TV menu as the standard. 4 General introduction • Size of the screen: 37794 cm • Aspect ratio: 16:9 • Screen resolution: 1366 x 768 • Brightness: 500 cd/m2 • Contrast: 1000:1 • Wide viewing angle 1767176° • Response time: 8 ms • Progressive scan • Color systems: PAL, SECAM, NTSC • Digital comb filter • NICAM Stereo, 2 x 5 W • “Picture in picture” • Teletext • Convenient OSD menu in Russian and English languages • Connections: 2 HDMI, VGA, S-Video, 3 composite video inputs, 2 component video inputs, composite video output, PC audio input, RF antenna • PC monitor compatible • Wide range power supply: 100-240 V, 50/60 Hz Accessories Note: Please keep the wrapping box and the padding well for future convenient use when you convey them. Please check the accessories. If anything is missed address to the seller. LCD TV Instruction manual AC Power cord Remote control (RC) AAA Batteries © © © © © © © © © © © © ©ee© °oo° 5 Controls and connection Place your LCD TV on a flat surface in a well-ventilated location. Rear panel Top panel Earphone terminal Top panel button description Button Description MENU Open the menu or switch among the menus. TV/AV To switch among the signal source. VOL-/+ Decrease/increase the sound volume. Adjust functions in menu operation. CH+/- In TV mode, decrease/increase channel number. Select functions in menu operation. POWER Enter or leave the standby mode. Following indicators are situated on the front panel of the TV. Below is the description of their functions. Infrared Receiver Sensor is intended for reception of the signal from remote control. Power Indicator • Red indicator lighting, this means the TV is in standby mode; • Red indicator (lighting for 10 seconds) and Yellow or Purple indicator (lighting for 5 seconds) in turn. This means the TV is in standby mode and the time to turning on the TV is set; • Green or Blue indicator lighting, this means the TV is in normal working condition; • Green or Blue indicator (lighting for 10 seconds) and Red indicator (lighting for 5 seconds) in turn. This means the TV is in normal mode with setting time to turning off or setting the sleeping TV off mode. 6 Rear panel terminals and controls Items Connection description 1 HDMI 2 Connect one end of the HDMI cable with HDMI output port, connect the other end of the HDMI cable with the HDMI port on the TV, and tighten the bolts clockwise on the each end of HDMI cable. 2 HDMI 1 3 VGA Connect one end of the VGA cable with the VGA port on computer, connect the other end of the VGA cable with the VGA port on the TV, and tighten the bolts clockwise on the each end of VGA cable. 4 S-Video The output S-Video terminal of DVD can be connected with the S-Video input port of the TV through S-Video cable. 5 Component video input 1 It’s convenient to receive the component video signal of high definition from DVD player. The output Component (YPbPr) terminal of DVD can be connected with the Component (YPbPr) input port of the TV through AV cable. 6 Component video input 2 7 Composite video inputs Capable of receiving PAL, NTSC, SECAM color systems; Very convenient to watch VCR (video cassette recorder), Pickup Camera, other Disc’s programs. The AV input of the TV can be connected with the output port of other AV equipment through AV cable. 8 Composite video output The product can receive different signals (the programs send by TV station) and transfer these signals through AV signal cable to other audio and video equipments. The AV output of the TV can be connected with the input port of other AV equipment through AV cable. 9 VGA (PC) audio input You can enjoy the audio information from computer by connecting with computer with an audio adapter cable. 10 RF antenna The RF output terminal can be connected with the RF input port of the TV. 11 AC (Power) switch Turn on the AC switch; the TV will enter into standby mode. When a complete turning off is required, please turn off the AC switch and unplug th...