Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17. Object and Liquid Entry-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV. ELECTRODE SYSTEM (NEC ART 250, PART H) 18. Servicing-Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in performance- this indicates a need for service. 20. Replacement Parts-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21. Safety Check-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. 22. Heat-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 12.DISPLAY button- Press to display the channel number on the screen. If you press it again, the channel number will disappear. 13.SLEEP button- Press the SLEEP button to display the sleep timer and start the function. The shut off time can be determined by the number of times you press the button. (0, 10, 20, 30,..90, 0 minutes) 14.GAME button- Press to set the Game mode. To exit, press the INPUT SELECT button. (See USING AUDIO/VIDEO INPUT JACKS and PICTURE ADJUSTMENT.) 15.AC cord- Connect to a standard AC outlet (120V/60Hz). NOTE: Unwrap the AC cord completely from the backcover before plugging the cord into an AC outlet. 16.AUDIO L/R (out) jacks- Connect to the audio input of an external amplifier or decorder. 17.S-VIDEO input jack- Connect to the SVIDEO output jack of a video camera or VCR using the S-VIDEO cable (not supplied). NOTE: The S-VIDEO jack on the rear panel is given priority over the VIDEO1 jack. 18.ANT(enna). IN jack- Connect to an antenna, cable system, or satellite system. 19.COMPONENT AUDIO INPUT jacks- Connect to the left/right channel audio output jacks of DVD player when using the Component Video input jacks. 20.COMPONENT VIDEO INPUT jacks- Connect to the Component Video output jacks of DVD player. INSTALLING THE BATTERIES 1) Slide the battery compartment cover back on the remote unit. 2) Insert 2 "AA" penlight batteries into battery compartment in the direction as indicated by the polarity (+ / -) markings. Batteries installed with incorrect polarity may damage the remote unit. 3) Replace the cover. USING AUDIO/VIDEO INPUT JACKS When you use the AUDIO/VIDEO input jacks or COMPONENT VIDEO INPUT jacks, select “VIDEO1” or “VIDEO2” or “COMPONENT” mode by pressing the INPUT SELECT button on the remote control. • To use the VIDEO1 INPUT jacks on the rear of the TV, select “VIDEO1”. • To use the jacks on the front of the TV, select “VIDEO2”. • To use the Component jacks on the rear of the TV, select “COMPONENT”. NOTES: • You may also set the Game mode by pressing the GAME button on the remote control. "GAME" appears on the TV screen. In this case, connect the external source to the AUDIO/VIDEO jacks on the front panel. (See PICTURE ADJUSTMENT.) • When you use the S-VIDEO connection, S-VIDEO jack on the rear panel is given priority over the VIDEO1 jack. PREPARATION FOR USE LANGUAGE SELECTION PICTURE CHANNEL SET [ENGLISH]ESPANOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] PICTURE CHANNEL SET [ENGLISH]ESPANOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] 3) Press the VOL(ume) button so that "ADD/DELETE" is selected. 4) Use the CH(annel) or button to select the channel you wish to put into memory or to erase from memory. Note: The display will return to the normal screen automatically in about 10 seconds. Perform "ADD/DELETE" funct...