Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
If you do not have a scart lead, tune in the VCR test signal to the TV programme number "0" by using the "Manual Programme Preset" option. (for details of how to manually programme these presets, see page 13, step a). Also refer to your VCR instruction manual to find out how to find the output channel of your VCR. Connecting a VCR that supports Smartlink: ■sgi Smartlink is a direct link between the TV set and the VCR. For more information on ISal Smartlink, please refer to the instruction manual of your VCR. If you use a VCR that supports Smartlink, please connect the VCR by using a Scart lead to the Scart (^^2/^q) @. If you have connected a decoder to the Scart :2/q or through a VCR connected to this Scart: Select the "Manual Programme Preset" option in the "Set Up" menu and after entering in the "Decoder**" option, select "On" (by using ♦ or ♦). Repeat this option for each scrambling signal. **This option is only available depending on the country you have selected in the "Language/Country" menu. continued... 18 I Additional Information Connecting to external Audio Equipment: Plug in your Hi-Fi equipment to the audio output sockets 0 if you wish to amplify the audio output from TV. Next ,using the menu system, select the "Sound Adjustment" menu. Enter to the "Detail Adjustment" option and set "TV Speakers" to "Off". Audio level of the external speakers can be modified by pressing the volume buttons on the remote control. Also treble and bass settings can be modified through the "Sound Adjustment" menu. Using Optional Equipment 1 Connect your equipment to the designated TV socket, as indicated in the previous page. 2 Switch on the connected equipment. 3 To watch the picture of the connected equipment, press the -?►") button repeatedly until the correct input symbol appears on the screen. Symbol Input Signals -0 1 • Audio / video input signal through the Scart connector H -Q • RGB input signal through the Scart connector H. This symbol appears only if a RGB source has been connected. -02 • Audio / video input signal through the Scart connector E. -f»S 2 • S Video input signal through the Scart connector @. -03 • Video input signal through the phono socket 0 and Audio input signal through B. 4 Press (3 button on the remote control to return to the normal TV picture. For Mono Equipment Connect the phono plug to the L/G/S/I socket on the front of the TV and select -03 input signal using the instructions above. Finally, refer to the "Sound Adjustment" section of this manual and select "Dual Sound" "A" on the sound menu screen. Additional Information 119 Specifications TV system: Depending on your country selection: B/G/H, D/K Colour system: PAL, SECAM NTSC 3.58, 4.43 (only Video In) Channel Coverage: VHF: UHF: CATV: HYPER: D/K: E2-E12 E21-E69 S1-S20 S21-S41 R1-R12, R21-R69 Picture Tube: Flat Display FD Trinitron 21" (approx. 55 cm. measured diagonally) Rear Terminals :1/-e :2/q (SMARTLINK) o 21-pin scart connector (CENELEC standard) including audio/video input, RGB input, TV audio/video output. 21-pin Scart connector (CENELEC standard) including audio / video input, S video input, selectable audio / video output and Smartlink interface. audio outputs (Left/ Right) - phono jacks Front Terminals ^3 video input - phono jack -© 3 audio input - phono jacks headphones jack Sound Output: 2 x 14 W (music power) 2 x 7 W (RMS) Power Consumption: 60 W Standby Power Consumption: 0.5 W Dimensions (w x h x d) : Approx. 516 x 471 x 487 mm. Weight: Approx. 27 Kg. Accessories supplied: 1 Remote Control (RM-887) 2 Batteries (IEC designated) Other features: • Teletext, Fastext, TOPtext • Sleep Timer • Wake UP Timer • Smartlink (direct link between your TV set and a compatible VCR. For more information on Smartlink, please refer to the Instruction Manual of your VCR). • TV system Autodetection. П Design and specifications are subject to change without notice. Ecological Paper- Totally Chlorine Free 20 I Additional Information Troubleshooting |H Here are some simple solutions to the problems which may affect the picture and sound. Problem Solution No picture (screen is dark) and no sound. • Check the aerial connection. • Plug the TV in and press the Q) button on the front of TV. • If the standby indicator (!) is on, press 1/© button on the remote control. Poor or no picture (screen is dark), but good sound. • Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to the factory settings. No picture or no menu information from equipment connected to the Scart connector. • Check that the optional equipment is on and press the -0 button repeatedly on the remote control until the correct input symbol is displayed on the screen. Good picture, no sound. • Press the +/- button on the remote control. • Check that "TV Speakers" is "On" on the "Sound Adjustment" menu. • Check that headphones are not connected. No colour on...