Évaluations - 3, GPA: 3.7 ( )

Fabricant : Samsung Taille : 10.25 mb Nom Fichier : Langue d'enseignement:

The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1. Press the PoWERO button on the remote control. >- The screen is turned off and a red standby indicator appears on the front of your set. 2. To switch your set back on, simply press the PoWERc!), numeric buttons (0~9), TV button or channel up/down (e/s) button again. >- Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial. English - 8 Plug & Play When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available. 1. Press the POWERQ button on the remote control. The message "Start Plug & Play" is displayed with "OK" selected. Start Plug & Play. Jqk | 2. Select the appropriate language by pressing the ▲ or ▼ but tons. S'Enter D Exit Press the ENTER button to confirm your choice. 3. Press the ◄ or ► buttons to select “Shop” or “Home”, then the ENTER button. >- We recommend setting the TV to Home mode for the best picture in your home environment. Shop mode is only intended for use in retail environments. >- If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the MENU button for five seconds on the side panel of the TV. 4. The message "Check antenna input." is displayed with "OK" selected. Press the ENTER button. >- Please check that the antenna cable is connected correctly. 5. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. 8. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER button. >• The channel search will start and end automatically. After all the available channels are stored, the "Clock Set" menu appears. Press the ENTER button at any time to interrupt the memorization process. 7. Press the ENTER button. Select the "Month", Year", "Day", Hour" or "Minute" by pressing the ◄ or ► buttons. Set the "Month", Year", "Day", Hour" or "Minute" by pressing the ▲ or ▼ buttons. >- You can also set the hour and minute by pressing the number buttons on the remote control. 8. Press the ENTER button to confirm your setting. ♦ Language: Select your language. ♦ Country: Select your country. ♦ Auto Store: Automatically scans for and stores channels available in the local area. ♦ Clock Set: Sets the current time for the TV clock. English - 9 TV Setu| I Plug & Play > 1 Language : English > Time > Game Mode : Off Blue Screen : Off > Melody 1 PC VMore : Off > ^ Move & Enter *D Return Country : Belgium > Auto Store > Manual Store > Channel Manager > Sort > Name > Fine Tune > If you want to reset this feature... 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Press the ENTER button again, to select "Plug & Play". 3. The message to "Start Plug & Play" is displayed. (on page 9) - Storing Channels Automatically - Storing Channels Manually Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ENTER button to select “Country”. 3. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. 4. Press the ▲ or ▼ button to select “Auto Store”, then press the ENTER button. 5. Press the ENTER button. The TV will begin memorizing all of the available channels. >- Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu. 8. After all the available channels are stored, the "Sort" menu appears. English - 10 Storing Channels Manually You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: ♦Whether or not to store each of the channels found. ♦The programme number of each stored channel which you wish to identify. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER button. 3. Press the ENTER button to select "Programme". 4. To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼ button and then press the ENTER button. >- You can also set a programme number by pressing number buttons on the remote control. 5. Press the ▲ or ▼ button to select "Colour System", then press the ENTER button. 8. Select the c...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :