Évaluations - 4, GPA: 3.5
(
)
)
|
Facilité d'utilisation
When the TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver. ^ NOTE • You can only control Anynet+ devices using the TV remote control, not the buttons on the TV, • The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. • The Anynet+ functions do not operate with other manufacturers' products. Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Connect only one receiver (home theatre). • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device's Video/Audio/HDMI Cable connections. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. • Check whether the TV remote control is in TV mode. • Check whether it is Anynet+ exclusive remote control. • Anynet+ does not work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial setup), etc.) • When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again. • Check if the Anynet+ Function of Anynet+ device is set on. I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. • Press the TOOLS button to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. • Select View TV in the Anynet+ menu. • Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. • Press P >/<, PRE-CH, and FAVCH to change the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) The message “Connecting to Anynet+ device...” appears on the screen. • You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. • Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. • You cannot use the play function when Plug & Play (Initial setup) is in progress. The connected device is not displayed. • Check whether or not the device supports Anynet+ functions. • Check whether or not the HDMI Cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. • Search Anynet+ devices again. • You can connect an Anynet+ device using the HDMI Cable only. Some HDMI cables may not support Anynet+ functions. • If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan. The TV programme cannot be recorded. • Check whether the antenna jack on the recording device is properly connected. The TV sound is not output through the receiver. • Connect the optical cable between TV and the receiver, 38 English Getting Started with Internet@TV [ MET ] h @TV Internet@TV brings useful and entertaining contents and services directly from the web to your TV. V ^ NOTE • Configure the network settings before using Internet@TV. For more information, refer to “Network Connection” (P. 23). • Unsupported fonts within the provider’s content will not display normally. • Slow responses and/or interruptions may occur, depending on your network conditions. • English may be only supported in application service depending on region. • This feature is not available in all locations. • If you experience a problem using an application, please contact the content provider. • According to circumstances of the contents provider, an application’s updates or the application Itself may be discontinued. • Depending on your country’s regulations, some application may have limited service or not be supported. Screen Display Information: Displays notices, new applications, and advertisemevnts brought to you by Samsung product introductions. TV Screen: Displays the current channel. Application service: You can experience various service by provided samsung. Recommended Applications: Displays the recommended service by Samsung. You are not able to add or delete a service in this list. Downloaded Applications: Displays the downloaded applications through the Samsung Apps. Internet@TV Settings: Edit and configure application and Internet@TV settings. Controls : • □ Red (Login): To log in to Internet@TV. • £ Green (Mark as Favorite): To mark the application as a favorite. • □ Blue (Sort by): To sort the application. • R Return: To return to the previous menu. ^ The Color buttons may work differently depending on the application. English 39 04 Advanced Features Advanced Features Account Login For an application with multiple categories, use ◄ and ► to access the different categories. Us...
Ce manuel est également adapté pour les modèles :TV - LE32C650L (40.15 mb)
TV - LE32C652L (40.15 mb)
TV - LE32C654M (40.15 mb)
TV - LE37C650L (40.15 mb)