Évaluations - 5, GPA: 3.6
(
)
)
|
Facilité d'utilisation
(Only when the Anynet+ enabled recording device is connected.) ^ The current TV programme is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded. ^ You can also record the source streams by selecting Record after pressing the TOOLS button. ^ Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual. Listening through a Receiver_ You can listen to sound through a receiver instead of the TV speaker. 1. Press the TOOLS button. Then Press the ENTER® button to select "Anynet+(HDMI-CEC)". Press the ▲ or ▼ button to select "Receiver", then press the ENTER® button. 2. Press the ◄ or ► button to select to "On", then press the ENTER® button. Now you can listen to sound through the receiver. 3. Press the EXIT button to exit. ^ When the receiver is set to On, you can listen to the TV sound through the 2-channel receiver. ^ If the receiver is exclusively for a home theatre only (supporting audio only), it may not appear in the device list. ^ Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work. ^ In case of a content with copyright problem, listening through the receiver may not properly operate. ^ If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the power cord or a power failure), the “TV Speaker” may be set to “Off’ when you turn the TV on again. (see page 24) English - 59 Check Points before Requesting Service Symptom Solution Anynet+ does not work. ■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. ■ Connect only one receiver. ■ Check if the Anynet+ device power cord is properly connected. ■ Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. ■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ■ Check whether the TV remote control is in TV mode. ■ Check whether it is Anynet+ exclusive remote control. ■ Anynet+ doesn’t work at a certain condition. (Searching channels, Operating WISELINK, Plug & Play, etc.) ■ When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or restart your TV. ■ Check if the Anynet+ Function of Anynet+ device is set on. I want to start Anynet+. ■ Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. ■ Press the TV/DTV button on the TV remote control to switch to TV. Then press the TOOLS button to show the Anynet+ menu and select a menu you want. I want to exit Anynet+. ■ Select View TV in Anynet+ menu. ■ Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. ■ Press any of P®/©, CH LIST, PRE-CH, and such to change to the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) The Configuring Anynet+ connection message appears on the screen. ■ You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. ■ Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. You cannot use the play function when Plug & Play is in progress. The connected device is not displayed. ■ Check whether or not the device supports Anynet+ functions. ■ Check whether or not the HDMI 1.3 cable is properly connected. ■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ■ Search Anynet+ devices again. ■ You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not support Anynet...
Ce manuel est également adapté pour les modèles :TV - LE32A556 (21.96 mb)
TV - LE32A557 (21.96 mb)
TV - LE32A558 (21.96 mb)
TV - LE32A559 (21.96 mb)