Évaluations - 3, GPA: 3
(
)
)
|
Facilité d'utilisation
For more information about connecting the video cable, see “Connecting the monitor” on page 2. Display colors are wrong • Press the Menu button, then the Auto button to automatically adjust the display image to the ideal settings. • Restart your computer with the monitor turned on. • Make sure that the video cable is connected securely to the back of the monitor and your computer. For more information about connecting the video cable, see “Connecting the monitor” on page 2. • Make sure that the video cable is not damaged. • Check the end of the video cable for any pins that might be bent or pushed in. Picture has shadows or “ghosts” • Press the Menu button, then the Auto button to automatically adjust the display image to the ideal settings. • Remove any extension cables or switchboxes. • Make sure that the video cable is connected securely to the back of the monitor and your computer. For more information about connecting the video cable, see “Connecting the monitor” on page 2. • Make sure that the video cable is not damaged. • Check the end of the video cable for any pins that might be bent or pushed in. • Make sure that your monitor connection is using the VGA cable that came with your monitor. Color is not uniform • Press the Menu button, then the Auto button to automatically adjust the display image to the ideal settings. • Make sure that the monitor warms up for at least 30 minutes before making a final judgment about color uniformity or brightness. Image is not sized or centered correctly • Press the Menu button, then the Auto button to automatically adjust the display image to the ideal settings. • Use the position controls to adjust the image. For instructions on how to adjust the display image position, see “Adjusting monitor settings” on page 5. The image remains after switching off the monitor • Image persistence is when a “ghost” of an image remains on the screen, even after switching the monitor off. To alleviate image persistence, turn off the monitor for as long as an image was displayed. If, for example, the image was on the monitor for one hour and a “ghost” remains, you should switch off the monitor for at least one hour to erase the image. • We recommend the use of a screen saver whenever the screen is idle. The image is unstable • Set your computer to a supported video mode, preferably 1680 x 1050 at 60 Hz. • Try plugging the monitor into a different, earthed (grounded), power outlet, preferably on a different circuit. • Check the display settings of your computer. Make sure that a supported mode is selected. • Check the display specifications section for more information. The message “No Input Signal” appears on the screen • Make sure that the video cable is correctly plugged into the analog video port on the back of the monitor. • Make sure that the other end is correctly plugged into the VGA port of your computer. The monitor has pixels that are always dark or too bright • This condition is normal and inherent in the TFT technology used in active-matrix LCD screens. eMachines’ inspection standards keep these to a minimum. If you feel these pixels are unacceptably numerous or dense on your display, contact eMachines Customer Care to identify whether a repair or replacement is justified based on the number of pixels affected. Using Your eMachines Flat-Panel Monitor Specifications Specifications are subject to change without notice or obligation. Many products for eMachines are custom engineered by our suppliers to eMachines specifications and may vary from similarly marketed products. Panel size 21.6 inches Panel type TFT LCD Viewable image size 21.6-inch diagonal Pixel resolution 1680 . 1050 (60 Hz) Pixel pitch 0.0109 . 0.0109 inches (0.27675 mm . 0.27675 mm) Text mode 720 . 400 Aspect ratio 16:10 Horizontal frequency 30 to 81 KHz Vertical refresh rate 56 to 76 Hz Tilt -5° to 20° Colors 16.2 million OSD languages English, French, Spanish, Italian, Japanese Connections and inputs Analog (VGA): 15-pin mini d-sub VGA Audio: mini-plug AC power Cables 15-pin mini d-sub analog VGA (included) Audio cable with mini-plug Audio power output 2 W/channel @ PC 1 Vrms Speaker (R/L) 2 W/16 ohm speaker Power consumption Normal operation: <55 W Power input 100-240 VAC, 50/60 Hz Temperature Operating: 41° to 104°F (5° to 40°C) Non-operating: -4° to 140°F (-20° to +60°C) Altitude Operating: 0 to 6561.68 feet (0 to 2000 m) Non-operating: 0 to 40,000 feet (0 to 12192 m) Relative humidity 20% to 85% (non-condensing) Power management Energy Star® Certifications UL, CSA, FCC Class B Dimensions 17.18 . 20.79 . 8.09 inches (436.6 . 526.8 . 205.5 mm) with basic stand Weight 14.5 lb (6.6 kg) 17 Safety, Regulatory, and Legal Notices • 17 Safety, Regulatory, and Legal Notices • Important safety information • Environmental information • Regulatory compliance statements • Notices Safety, Regulatory, and Legal Notices Important safety information Warning Always follow these instructions to help guar...
Ce manuel est également adapté pour les modèles :TV - E216T5W (701.8 kb)
TV - E216T5W (701.8 kb)
TV - E216T5W (701.8 kb)
TV - E216T5W (701.8 kb)