Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
Contact a Service Agent. This may cause a fire or an electric shock hazard ! Do not touch metal parts during or soon after operation since the vents and lamp cover will remain very hot! Do not remove any covers (except lens cover). High risk of Electric Shock! CAUTION concerning the Power Cord Don’t look directly onto the lens when the projector is in use. Eye damage may occur! Most appliances recommend they be placed upon a dedicated circuit; that is,a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits.Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets,loose or damaged wall outlets, extension cords, frayed power cords,or damaged or cracked wire insulation are dangerous.Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance,and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Safety Instructions Using WARNING Never touch the wall outlet when Do not drop the projector or allow impact shock. there is leakage of gas, open the This may cause mechanical failure or personal injury ! windows and ventilate. It can cause a fire or a burn by a spark. Using NOTES Do not place heavy objects on top of projector. This may cause mechanical failure or personal injury! Take care not to cause impact to the lens particularly when moving the projector. Do not touch the lens of the projector. It is delicate and easily damaged. Do not use any sharp tools on the projector as this will damage the casing. Cleaning WARNING Do not use water while cleaning the projector This may cause damage to the projector or an electric shock hazard. Cleaning NOTES Contact a Service Center once a year to clean the internal parts of the projector. Accumulated dust can cause mechanical failure. Others WARNING In the unlikely event of smoke or a strange smell from the projector, switch it off, unplug it from the wall outlet and contact your dealer or a service center. This may cause a fire or an electric shock hazard ! Use an air spray or soft cloth that is moist with a neutral detergent and water for removing dust or stains on the projection lens. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. This may cause damage to the Projector or cause an electric shock hazard ! Do not attempt to service the projector yourself. Contact your dealer or a service center. This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty ! Others NOTES Be sure to unplug if the projector is not to be used for a long period. Accumulated dust may cause a fire hazard! Refer to 43~44 page to replace the lamp. Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. Only use the specified type of battery. This could cause damage to the remote control. Part Descriptions Part Descriptions Main Body * The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the manufacturing process and does not always indicate a malfunction. Auto sliding door *When the projector is turned on, auto sliding door is opened automatically. Remote control sensor Lens shift Indicators Kensington Security System Connector (Refer to Desktop Stand Installation and Setup Guide) RS-232C[Service] Shutter *When the projector is turned on, shutter is opened automatically. S-Video RGB Input (PC/DTV) HDMI Input Video AC IN Part Descriptions Control Panel MENU Button SOURCE Button A OK Button FOCUS +/- Button ZOOM +/- Button POWER Button Remote Control Part Descriptions POWER Button AUTO Button (Refer to p.34) F / G Button STILL Button (Refer to p.33) BLANK Button (Refer to p.31) KEYSTONE +/- Button (Refer to p.31) FOCUS D / E Button (Refer to p.21) POWER AUTO SOURCE STILL BLANK KEYSTONE FOCUS LIGHT ZOOM MENU ARC OK SOURCE Button D / E Button MENU Button ARC Button (Refer to p.29) A OK Button ZOOM +/- Button (Refer to p.21) LIGHT Button * If you press the LIGHT buttons, the LED will be turned on. As 5 seconds go on, LED will be turned off. Installing Batteries CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. • Open the battery compartment cover on the back of the remote control and insert the batteries with correct polarity, match “+” with “+”, and match “-” with “-”. • Install two 1.5V “AAA” batteries. Don’t mix use...
Ce manuel est également adapté pour les modèles :TV - AN110B-JD (1.35 mb)
TV - AN110B-JD (1.35 mb)
TV - AN110W-JD (1.35 mb)
TV - AN110W-JD (1.35 mb)