Log:
Évaluations - , GPA: ( )

Instructions Mitsubishi Electronics, Modèle VS-50805

Fabricant : Mitsubishi Electronics
Taille : 1.23 mb
Nom Fichier : 1fe7fa1e-b872-40b3-99e3-a59b56c7c482.pdf

Langue d'enseignement: en

Le document est chargé, s'il vous plaît patienter
Le document est chargé, s'il vous plaît patienter

Facilité d'utilisation


White Red W h i t e R e d Attach only one cable type Attach only one cable type Connection of TV to Stereo Audio System 1. Connect the audio cables from AUDIO, MONITOR OUTPUT on the TV back panel to TV IN or AUX IN terminals on the back of the audio system. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. 2. Turn off the TV’s speakers through the AV CONNECTION Menu (pages 32-34). 3. Set the audio system’s input to the TV or AUX position to hear the TV's audio through your stereo system. ANT-B LOOP OUTANT-A S-VIDEO V L R(MONO) Y Cr Cb VIDEO AUDIO INPUT-1 INPUT-2 INPUT-3 HDTV VIDEO Y Pr H V HDTV CONTROL HDTV AUDIO L R(MONO) V L R(MONO)IR HOME THEATER ACTIVE A/V NETWORK MONITOR OUTPUT VIDEO AUDIO DVD VIDEO HIGH-DEFINITION INTERFACE Pb Red Lead White Lead Red Lead Audio system back panel section OUTOUT OUT ININININ SUBWOOFER (MONO) CD AUX TAPE 1 TAPE 2 L R TV back panel White Lead Connection of TV to the Active A/V Network To control your Mitsubishi audio and/or video products with one remote control Connect the A/V network cable from ACTIVE A/V NETWORK on the TV back panel to IN on the back of a MitsubishiVCR that has A/V network terminal. Turn the ACTIVE A/V NETWORK on through the AV CONNECTION menu (pages 32-34). IMPORTANT IMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANT Check the Owner's Guide of your added Mitsubishi components to ensure the best possible connections. ANT-B LOOP OUTANT-A S-VIDEO V L R(MONO) Y Cr Cb VIDEO AUDIO INPUT-1 INPUT-2 INPUT-3 HDTV VIDEO Y Pr H V HDTV CONTROL HDTV AUDIO L R(MONO) V L R(MONO)IR HOME THEATER ACTIVE A/V NETWORK MONITOR OUTPUT VIDEO AUDIO DVD VIDEO HIGH-DEFINITION INTERFACE Pb Mitsubishi Component back panel section PREOUTA/V NETWORKINPUT REAR CENTER SUB WOOFER IN OUT L R L R TV back panel 13 Connection of TV to a Mitsubishi AV Receiver Infrared Emitter (IR) for Home Theater Control 1. Connect the IR emitter cable to IR HOME THEATER on the back of the television. 2. Place the IR emitter cable under or along side of the AV receiver. Place the IR lens directly in front of the infrared location of the AV receiver. Infrared locations are usually on the front glass section of the receiver. 3. Place the unused transmitter in an out-of-theway location. 4. For permanent installation of the IR emitter cable, use the included adhesive tape to secure the bottom of the emitter to the anchoring object you choose. TV back panel Mitsubishi AV Receiver ANT-B LOOP ANT-A OUT S-VIDEO V L (MONO) R Y Cr Cb VIDEO AUDIO INPUT-1 INPUT-2 INPUT-3 HDTV VIDEO Y Pr H V HDTV CONTROL HDTV AUDIO L(MONO) R IR V L (MONO) R HOME THEATER ACTIVE A/V NETWORK MONITOR OUTPUT VIDEO AUDIO DVD VIDEO HIGH-DEFINITION INTERFACE Pb ANTENNA ON OFF AUTO STANDBY S - VIDEO AUX CD TAPE 1 TAPE 2 AM 300W FM R VCR 1 VCR 2 TV DVD OUT PRE OUT AUDIO AVIS RISQUE DE CHOC ELECTRIQUE NE PAS ENLEVER UL R UL R C AUDIO EQUIPMENT UL FILE No. E51519 LISTED 857C IN IN IN OUT IN OUT IN OUT IN IN IN MONITOR VCR 1 VCR2 TV DVD OUT IN OUT IN IN IN MONITOR VCR 1 VCR2 TV DVD OUT OUT OUT IN OUT IN IN IN VIDEO GND 75W L R SUR. FRONT CENTER SUB REC SOURCE LINE OUT WOOFER RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING AV Receiver back panel section L R ANT-B LOOP ANT-A OUT S-VIDEO V L (MONO) R Y Cr Cb VIDEO AUDIO INPUT-1 INPUT-2 INPUT-3 HDTV VIDEO Y Pr H V HDTV CONTROL HDTV AUDIO L(MONO) R IR V L (MONO) R HOME THEATER ACTIVE A/V NETWORK MONITOR OUTPUT VIDEO AUDIO DVD VIDEO HIGH-DEFINITION INTERFACE Pb 1. Connect a video cable from VIDEO, MONITOR OUT on the back of the AV Receiver to VIDEO, INPUT-1 on the TV back panel using a VIDEO cable. 2. Connect a video cable from VIDEO, MONITOR OUTPUT on the TV back panel to VIDEO TV IN on the back of the AV Receiver. 3. Connect a set of audio cables from AUDIO, MONITOR OUTPUT on the TV back panel to AUDIO TV IN on the back of the AV Receiver. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. II M PP O RR TT A NN TT See pages 67-68 for details on using the TV's IR emitter to control a Mitsubishi AV receiver. Connection of TV to AV Receiver Connection of TV to DVD with Component Video Outputs 1. Connect the ComponentVideo cables from VIDEO OUT on the back of the DVD player to DVDVIDEO input on the TV back panel, matching the correct components: • Y toY, • Cr to Cr, • Cb to Cb. 2. Connect a set of audio cables from AUDIO OUT on the back of the DVD player to AUDIO, INPUT-3 on the TV back panel. The red cable connects to the R (right) channel and the white cable connects to the L (left) channel. IMPORTANT IMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANTIMPORTANT 1. See Appendix 4 for component video signal compatibility information. 2. For Digital Audio connections, see the Owner's Guides of your DVD Player and AV receiver. R L ANALOGVIDEO OUT Y Cb Cr 1 2 AUDIO OUT DVD back panel TV back panel ANT-B LOOP OUTANT-A S-VIDEO V L R(MONO) Y Cr Cb...

Ce manuel est également adapté pour les modèles :
TV - WS-55805 (1.23 mb)
TV - WS-55805 (1.23 mb)
TV - WS-55905 (1.23 mb)
TV - WS-55905 (1.23 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories