|
Instructions SoundMax, Modèle SM-LCD712
Fabricant : SoundMax Taille : 387.03 kb Nom Fichier : SoundMax-SM-LCD712-Pdf-Rus.Pdf
Langue d'enseignement:
|
|
|
|
Aller à la télécharger
Facilité d'utilisation
When sound is muted, a corresponding symbol appears on the display. VOL-/VOL+ buttons: Press VOL- button, the volume of TV set decreases. Press VOL+ button, the volume of TV set increases. CH+/CH- buttons: Press CH+ button, the number of TV channel increases. Press CH- button, the number of TV channel decreases. Number buttons and two-digit button: When the channel is a one-digit figure, just press the corresponding number button. If the channel is a two-digit figure, you should press two-digit button first to show - - on the display screen before further pressing the corresponding number buttons. MODE button: Press this button to select picture mode. Note: This model has no memory card slot. The SD card hole is not functional and is shut with a rubber cover. 5 Installation and connection Stand installation: Release the front plastic nut on the top of the bracket but do not separate it from the stand. Insert the metal washer with the bracket into a hollow at the back of the unit and move the bracket up to a suitable height. Tighten the front plastic nut on the bracket to fix the bracket with the unit. Control the screen angle with the lateral screw. Screw the stand to the bracket. Connection of the antenna: Plug the antenna into the Antenna jack situated on the rear panel of the unit. Connection of headphone: Connect the headphone to the headphone jack for private listening. The speakers will not operate when headphones are connected. Connection to power source: Connect one round end of attached AC/DC adaptor or car adaptor to the power source input jack and the other end to the wall outlet at the suitable voltage. When in house, use the AC/DC adaptor; for car use, connect with the car adaptor (adaptors included should be only used). Press POWER button to turn on the unit. AV input connection Connect the AV cable as showed in the picture below. After connection, switch the unit to the AV mode. 6 Menu operation AV MODE Press MENU button to access setting menu for picture, audio, function, system and clock. Press CH+/CH- buttons to choose the parameter you need to adjust. Then press VOL+/VOL- buttons to adjust the parameter. PICTURE BRIGHT CONTRAST COLOR AUDIO VOLUME FUNCTION ö': ZOOM LANGUAGE SIGNAL Notes: FUNCTION: Zoom is for changing the screen size; Language is for selecting the on-screen menu language; Signal is for selecting AV or TV signal. SYSTEM: S-Roloc is for selecting Pal/NTSC/Secam/Auto TV system. CLOCK: Sleep is for choosing the period (in minutes) until the automatic turning off; Time is for setting the current time; Off-time is for setting the time of automatic turning off; On-time is for setting the time of automatic turning on. TV MODE Press MENU button to access setting menu for picture, audio, function, system, preset and clock. Press CH+/CH- buttons to choose the parameter you need to adjust. Then press VOL+/VOL- buttons to adjust the parameter. PICTURE BRIGHT CONTRAST COLOR AUDIO VOLUME FUNCTION © ZOOM LANGUAGE SIGNAL SYSTEM S-ROLOC S-SYS SWAP COPY PRESET AUTO-SEARCH SEARCH FINE SKIP CLOCK SLEEP TIME OFF-TIME ON-TIME 7 Notes: SYSTEM: S-sys is for selecting the sound system; Swap is for selecting the channel to be substituted by the current one; Copy is for selecting the channel to be copied to the current memory. PRESET: Auto-search is for automatic search of channels; Search is for manual search of channels; Fine is for fine frequency adjusting; Skip is for defining a channel to be skipped while selecting channels. 8 Troubleshooting The following occurrences do not indicate that the television is faulty. Before you request repair, follow the listed methods to check the device. Occurrences Possible reasons No picture and sound AC adapter or automobile adapter is not properly connected. Uncertified power is being used. Power switch is off. TV/AV is not properly chosen. No picture Check to see if the channels are selected correctly. Readjust automatic channel tuning. No sound Check to see if the audio volume is off or audio system is improperly set and the earphone is inserted. Poor signal or the sound elimination function is on. Audio system is not properly chosen. Poor reception Antenna is correctly adjusted and that the channel is tuned correctly. Dark picture Check that the brightness and contrast are set correctly. Also that the environmental is too low Vague picture or unstable picture Check that the antenna is correctly adjusted. Snowflake interference is possibly affected electric wave interference from vehicle motors, trains, high-voltage power wired or neon lights. No color Check that the color and the color system are adjusted correctly. Remote control doesn't work Check to see that whether batteries are exhausted and strong sunshine's on the receiver. 9 Specification Product name: 7" TFT LCD color TV Receivable channels: 48.25 MHz - 863.25 MHz Aspect ratio: 16:9 Color system: PAL/SECAM Resolution : 480(H) x 23...
Écrivez votre propre critique du dispositif
|
|