Évaluations - 4, GPA: 4.8
(
)
)
|
Facilité d'utilisation
Press the POINT LEFT/RIGHT buttons to select IMAGE 0 and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to change by pressing the POINT UP/DOWN buttons. To change the value, press either the POINT RIGHT button or the POINT LEFT button. Fine sync. Adjust the picture as necessary to eliminate fUcker from the display. (From 0 to 255.) Total dots The number of the total dots in one horizontal period. Adjust the number to match your PC image. White balance (Red / Green / Blue) Move the arrow to Red. Green, or Blue that you want to adjust. Press POINT LEFT button to adjust the color of image lighter, and press POINT RIGHT button to adjust deeper. (From 0 to 63.) Contrast Press POINT LEFT button to adjust the image lighter, and press POINT RIGHT button to adjust deeper. (From 0 to 63.) EJnnSESl Press POINT LEFT button to adjust the image darker, and press POINT RIGHT button to adjust brighter. (From 0 to 63.) amää a Pine syncB U Total dots g White balança #| Rad oj Graan si It indicates the roughly level of the item. Move the arrow to the Hem and press POINT RIGHT / LEFT button. Close the PICTURE IMAGE ADJUSTMENT Menu. Reset Each of the keys operates as follow. • • Recalls the data previously adjusted. Stored Stores the adjusted data in the memory. Quit |.... Closes the PICTURE IMAGE ADJUSTMENT Menu. NORMAL FUNCTION The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Units). The ‘Normal” display will be displayed on the screen for a few seconds. 27 COMPUTER MODE AUTO IMAGE FUNCTION The Auto Image function is provided to automatically adjust Fine sync.. Total dots, and Picture Position for most computers. J Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE [|] and press the SELECT button. Another dialog box AUTO IMAGE Menu will appear. 2 Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN button. Change the setting On or Off by pressing the SELECT button. Adjust the picture as necessary to eliminate flicker from the display. This item can be adjusted manually. (Refer to page 27.) Total dots The number of the total dots in one horizontal period. This item can be adjusted manually. (Refer to page 27.) Position Adjustment of the position of the image. This item can be adjusted manually. (Refer to page 28.) 2 Move the arrow to "Go!r and press the SELECT button to start the Auto Image function. This adjustment can be executed by pressing AUTO IMAGE Dutton on the Top Control and the Remote Control Unit. Stored Got Stores the On/Off setting of each item. Starts the Auto Image Adjustment. Quit].... Closes the AUTO IMAGE ADJUSTMENT Menu. NOTE : The Fine sync., Total dots, and Picture Position of some computers may not be fully adjusted with the Auto Image Function. In that case, manual adjustment is required to make fine image. (Refer to page 27 to adjust 'Fine sync." or ‘Total dots" and page 28 to adjust Picture Position.) MM*HBHBl Fine sync 0"J Total dots -P” J Position On J Stored Got ft starts the adjustment on the item set to ment f •On" / Oull It terminates the PICTURE IMAGE ADJUSTMENT Menu. Move the arrow to the >tem and then press the SELECT button. PICTURE POSITION ADJUSTMENT The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. J Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select POSITION E0 and press the SELECT button. The PICTURE POSITION dialog box will appear. 2 Move the image by pressing the POINT UP / DOWN / RIGHT / LEFT buttons. To cancel POSITION mode, press the any buttons except SELECT, RIGHT CLICK, POINT, PAGE AfW or LASER button. To recall the position previously adjusted, press NORMAL button. mn PICTURE POSITION dialog box Press the POINT UP / DOWN / RIGHT / LEFT buttons to move the image 28 COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the image in desirable size. I Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN [5] and press the SELECT button. Another diaJog box PICTURE SCREEN Menu will appear. O Press the POINT DOWN button and a red arrow icon will appear. Move the arrow to the function that you want to select and then press SELECT button True To turn the image into its original size select True in the dialog box. When the original image size is larger than the screen size (1024 x 768). this projector becomes Digital Zoom mode automatically. Keystone When the image is distorted vertically, select Keystone in the dialog box. The ON-SCRE...
Ce manuel est également adapté pour les modèles :TV - LC-XNB2U (2.43 mb)