Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
Notice for USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Relocate the receiving antenna. • Increase the separation between equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Notice for Canada Class B Clause This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging. When this logo is attached to a product, it means a financial contribution has been paid to the associated national recovery and recycling system. © 2008 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 4 EN 2 Welcome Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at com/welcome. 3 Set up SDV3132 To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note • Choose a location near a window which gives the antenna a clear view of the transmitter. Note • Place the antenna away from the metal surface to avoid interference. Connect to the TV 1 One end of the coaxial cable is already connected to the signal output of the antenna. 2 Connect the other end to the input on the TV receiver. TVANT. Tune for better reception 1 Turn the TV to the desired channel/ station. 2 Turn the antenna around until the reception is achieved. 360 English EN 5 Note • To check the distance from the local TV broadcast transmitters to your location, visit org for more information. Mount SDV3132 on the wall 1 Choose a spot near the TV. 2 Position the screws to fit the hooking holes. 3 Fix the provided screws into the wall and make sure they are fixed firmly into the wall. 4 Hook the antenna on the wall. 4 Set up a digital tuner with this antenna You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: • Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically . • Connect the antenna directly to the TV. Tune to the analogue channels and find the best antenna location. Then re-connect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner. 5 Frequently asked questions Can this antenna receive digital or work with ATSC broadcasts? Yes, this antenna is designed to receive ATSC and HDTV broadcasts. Where should I place the antenna in order to get the best reception possible? Choose a location near a window which gives the antenna a clear view of the transmitter. Note • For best reception, place the antenna away from the metal surface to avoid interference. Can I set up this antenna with a digita...