Log:
Évaluations - 3, GPA: 4 ( )

Instructions Philips, Modèle SDV5119/27

Fabricant : Philips
Taille : 413.52 kb
Nom Fichier : sdv5119_27_dfu_aen.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


• Consult the dealer or an experienced radio/TV technician for help. Notice for Canada Class B Clause This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging. When this logo is attached to a product, it means a financial contribution has been paid to the associated national recovery and recycling system. © 2008 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 4 EN 2 Your SDV5119 Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at com/welcome. Overview 1 1 2 3 2 4 VHF rod antenna UHF loop antenna Built-in coaxial cable connected to signal output (for TV connection) Antenna stand EN 5 3 Get started To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note • Choose a location near a window which gives the antenna a clear view of the transmitter. Note • Place the antenna away from the metal surface to avoid interference. Connect to the TV 1 One end of the coaxial cable is already connected to the signal output of the antenna. 2 Connect the other end to the input on the TV receiver. Note • Ensure the antenna flat is set against its base on a horizontal surface. 4 Set up SDV5119 For VHF reception 1 Extend the VHF rod antenna to the longest possible length. 6 EN 2 Turn the TV to the desired channel/ station. Move the VHF rod antenna in different directions up and down until the reception is achieved. For UHF reception 1 Turn the TV to the desired channel/ station. 2 Tilt or swivel the UHF loop antenna towards the transmitter until the reception is achieved. Note • To check the distance from the local TV broadcast transmitters to your location, visit org for more information. Set up a digital tuner with this antenna You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: • Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically . • Connect the antenna directly to the TV. Tune to the analogue channels and find the best antenna location. Then re-connect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner. EN 7 5 Frequently asked questions Can this antenna work with Analogue transmissions? Yes, this antenna can receive analogue television broadcasts in the UHF and VHF bandwidths. Can this antenna receive digital or work with ATSC broadcasts? Yes, this antenna is designed to receive ATSC and HDTV broadcasts in the UHF & VHF bandwidths. Where should I place the antenna in order to get the best reception possible? Choose a location near a window which gives the antenna a clear view of the transmitter. Note • For best reception, place the antenna away from the metal surface to avoid interference. Can I set up this antenna with a digital tuner? Yes, this antenna can be set up with a digital tuner. (see ‘Set up a digital tuner with this antenna’ on page 8) 6 Warranty and Service Limited One-Year Warranty Philips warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for one year from the date of your purchase of this product.This warranty extends only to the original purchaser of the product, and is not transferable.To exercise your rights under this warranty, you must provide proof of purchase ...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories