Évaluations - 2, GPA: 3
(
)
)
|
Facilité d'utilisation
However, if the program does not provide any rating information, nothing will be displayed in the banner and ratings blocking will not take effect. • To display the rating of the program you are watching, press RECALL on the remote control. If it is not rated, the word “NONE” appears. TV –PG L V NONE 94 94 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. Chapter 9: Using the Locks menu Blocking channels With the Channels Block feature, you can block specific channels. You will not be able to tune blocked channels unless you clear the setting first. To block channels: 1. Press MENU and highlight the Locks menu icon. 2. Press z, which displays the PIN code entering screen. 3. Enter your four-digit PIN code (see page 93 for details). 4. Press z to highlight Channels Block and then press ENTER. Navigate Select Back ExitCH RTN EXIT Edit Rating Limits Channels Block Input Lock Off Off OffFront Panel Lock Enable Rating Blocking OffGame Timer New PIN Code Locks 5. Using the yz x • buttons, select the input for which you want to change the rating limits (ANT1, ANT2, or Cable Box, if connected) and press ENTER. A list of the channels available for that input will be displayed along with the call letters for each channel, if available. 6. Press yz x • to highlight the channel you want to block, then press ENTER, which puts an “X” in the box next to that channel. 7. Repeat step 6 for other channels you want to block. Channels Block ANT 1 1 ANT 1 ANT 2 Cable Box 2 3 4 5 6 7 8 9 10 Cancel Done Block All Allow All 8. Highlight Done and press ENTER. To unblock individual channels: In step 6 above, press yzx • to highlight the channel you want to unblock, and then press ENTER to remove the X from the box. To block all channels at once: Highlight Block All in step 6 above. To unblock all locked channels at once: Highlight Allow All in step 6 above. Channels Block ANT 1 1 ANT 1 ANT 2 Cancel Done Block All Allow All Cable Box 2 3 4 5 6 7 8 9 10 Note: Channel blocking may not take effect if you have a cable box connected and use the cable box controls to change channels. Unlocking programs temporarily If you try to watch a TV program that exceeds the rating limits you set, the TV enters program lock mode. You can either unlock the program temporarily or select a non-locked program to watch. To temporarily unlock the program: 1. Press MUTE. 2. Enter your four-digit PIN code and press ENTER. If the correct code is entered, the program lock mode is released and the normal picture appears. All locking is disabled until the TV is turned off, and will be enabled when the TV is turned on again. Locks Active Enter PIN code to temporaily un- block. Cancel **** Done Locking video inputs You can use the Input Lock feature to lock the video input sources (VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD-1, ColorStream HD-2, HDMI 1/HDMI 2) and channels 3 and 4. You will not be able to view the input sources or channels until you turn off the input lock. To lock the video inputs: 1. Press MENU and highlight the Locks menu icon. 2. Press z to display the PIN code entering screen. 3. Enter your four-digit PIN code and press •. 4. Press z to highlight Input Lock and press •. 5. Press y or z to select the level of video input locking you prefer, as described below: VIDEO: Locks VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1/ Enable Rating Blocking Edit Rating Limits Channels Block Input Lock Off OffFront Panel Lock Off OffGame Timer New PIN Code Locks Off Video HD2, and HDMI. Video + VIDEO+: Locks VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1/HD2, HDMI 1/ HDMI 2, and channels 3 and 4. Select VIDEO+ if you use the antenna terminal to play a video tape. Navigate Select Back ExitCH RTN EXIT Note: Make sure the POP is not on channel 3 or 4. Off: Unlocks all video input sources. 6. Press ENTER. Note: When the CableCARD™ is inserted, Video+ will behave the same as Video lock. Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 95 Chapter 9: Using the Locks menu Using the GameTimer™ You can use the GameTimer to set a time limit for playing a video game (30–120 minutes). When the GameTimer is activated, the TV enters VIDEO LOCK mode and locks out the input source for the video game device. To set the GameTimer™: 1. Press MENU and highlight the Locks menu icon. 2. Press z to display the PIN code entering screen. 3. Enter your four-digit PIN code and press •. 4. Press z to highlight Game Timer and then press •. 5. Press y or z to select the length of time until the Video Lock is activated (30, 60, 90, or 120 minutes) and press ENTER. Enable Rating Blocking Edit Rating Limits Channels Block Input Lock Off Off Off Front Panel Lock Game Timer New PIN Code Locks Off Off 30 Min 60 Min 90 Min 120 Min Using the front panel lock feature You can lock the front panel touchpad to prevent your settings from being changed accidentally (by children, for example). When the front panel lock is On, none of the controls on the TV front touchpad will operate except POWER...