Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
Adjust tracking manually using the TRACKING + or – button on the remote control. Clean the video heads. Aim the remote control at the remote sensor. Operate within 15 feet or reduce the light of the room. Clear the path of the beam. Replace the batteries. Insert correctly. The remote control is not aimed at the sensor. Distance is too far or too much light in the room. There is an obstacle in the path of the beam. The batteries are weak. The batteries are not inserted correctly. Remote control does not operate. Noise bars appear on the screen. Timer recording does not work. TV recording does not work. Closed caption is not activated. TV shuts off. 34 SYMPTOM CAUSE POSSIBLE SOLUTION PAGE RECORDING PLAYBACK REMOTE CONTROL 42, 43 52 10 10 10 36 17 43 — 10 10 30 51 5L80101C P44-BACK 51 20/4/04, 16:23 VIDEO HEAD CLEANING VIDEO HEAD CLOGGING The video heads are the means by which the TV/VCR reads the picture from the tape during playback. In the unlikely event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be determined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely snowy). If this is the case, use a high quality head cleaning system or have them cleaned professionally. Good picture Snowy picture VIDEO HEAD CLEANING Video head cleaning is needed when the playback picture becomes unclear. This signifies that the heads are getting dirty and can occur when playing poor quality or damaged tapes. If the heads require cleaning, use a equivalent high quality chemical non-abrasive (wet) head cleaning tape or have them cleaned professionally. If playing a head cleaning tape in the VCR once does not improve the picture, play it several times before requesting service. DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE TOP COVER. NOTES: • Video heads may eventually wear out and should be replaced when they fail to produce clear pictures. • To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes. SPECIFICATIONS Picture tube: Type 13 (335.4 mm diagonal) Tuner type: Quartz PLL frequency synthesized Receiving channels: VHF 2-13 UHF 14-69 Cable TV 14-36 (A)-(W) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94) 95-99 (A-5)-(A-1) 100-125 (100)-(125) 01 (5A) Antenna input: VHF/UHF In 75 ohms coaxial Speaker: 1-1/2 x 2-11/16 inches (38 x 69 mm), 8 ohm Audio output power: 1.5W VCR Video system: VHS, 2 rotary heads helical scanning system Video signal: NTSC color Cassette tape: VHS Audio track: 1 track Tape speed: SP: 33.35 mm/sec. SLP: 11.12 mm/sec. F.FWD/REW time: F.FWD: Approx. 4 minutes 50 seconds (T-120 cassette) at 25°C (77°F) REW: Approx. 2 minutes 30 seconds (T-120 cassette) at 25°C (77°F) Speed search: SP 3 & 5 x normal speed SLP 9 & 15 x normal speed GENERAL Power source: AC 120V 60Hz Power consumption: 65 Watts Dimensions: Width: 14-1/4 inches (362 mm) Height: 15-1/16 inches (382 mm) Depth: 14-3/8 inches (365 mm) Weight: 24.3 Ibs. (11 kg) Terminals: Video In: (RCA) 1 Vp-p/75 ohm Audio In: (RCA) –8 dBm/50k ohm Storage temperature: –20°C to 60°C (–4°F to 140°F) Operating temperature: 5°C to 40°C (41°F to 104°F) Remote control: Infrared, direct access, 2 x AAA batteries Accessories: 300-75 ohm matching transformer Remote control Batteries (2 x AAA) TELEVISION Specifications are subject to change without notice. Tape Speed shown is approximate. 52 5L80101C P44-BACK 52 20/4/04, 16:23 LIMITED WARRANTY TOSHIBA COMBINATION TELEVISION AND VIDEO CASSETTE RECORDER Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee. Limited Ninety (90) Day Warranty TACP warrants this product and its parts against defects in materials or workmanship for a period of ninety (90) days after the date of original retail purchase. During this period, TACP will repair a defective product or part, without charge to you. You must deliver the entire set to an Authorized TACP Service Station. You pay for all transportation and insurance charges for the set to and from the Service Station. Limited One (1) Year Warranty TACP further warrants the parts in this product against defects in materials or workmanship for a period of one year after the date of original retail purchase. During this period TACP will replace a defective part without charge to you, except that if a defective part is replaced after ninety (90) days from the date of original retail purchase you pay labor charges involved in the replacement. You must also deliver the entire product to a TACP Authorized Service Station. You are responsible for all transportation for the set to and from the Service Station. Limited Two (2) Year Warranty of Picture Tube TACP further warrants the picture tube in this product against...
Ce manuel est également adapté pour les modèles :joueurs de magnétoscope / vidéo - TV/ Combo MV13P2 (2.31 mb)