Évaluations - , GPA: ( )

Instructions RCA, Modèle 28

Fabricant : RCA
Taille : 622.84 kb
Nom Fichier : 1600420_PM_EN.pdf

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Tape Selection The quality of tape you use greatly affects record/playback quality and the life of the Model 28. Use only video cassettes that display the official logo. High-grade tape has a better oxide coating that helps prevent dirty video heads and gives the best results. Although T-160 video cassettes offer the longest recording time, they contain thinner tape that is more likely to jam. We suggest you use T-120 or shorter length tape. The following chart shows the maximum recording times for different-length tapes at the three recording speeds. Tape Length SP LP SLP T-60 1 hour (60 min.) 2 hours (120 min.) 3 hours (180 min.) T-120 2 hours (120 min.) 4 hours (240 min.) 6 hours (360 min.) T-160 22/3 hours (160 min.) 51/3 hours (320 min.) 8 hours (480 min.) Erase Protection Video cassettes have an erase-protection tab to prevent accidental erasure. To prevent recording on a tape, break off the tab using a screwdriver. The cassette automatically ejects if you try to record on the tape. If you want to record on a video cassette that has had its tab removed, put a piece of heavy plastic tape over the erase-protection tab hole. 28 16-420.fm Page 29 Tuesday, July 20, 1999 11:32 AM IMMEDIATE RECORDING Notes: • You cannot use the Model 28 to record one program while watching another. • If you want to record from a VCR or other audio/video source with A/V outputs, see “Dubbing (Copying) a Tape” on Page 35. Follow these steps to record the program you are watching. 1. Insert a blank cassette, or one that you want to record over, into the cassette compartment. The Model 28 automatically turns on. Note: If a cassette was loaded when you last turned off the Model 28, you must press POWER to turn on the Model 28. 2. Repeatedly press SPEED on the remote control until the desired recording speed (SP, LP, or SLP) appears on the TV screen. SP 3. Press CH or CH or use the remote control’s number buttons to select the desired channel. 4. Press RECORD on the remote control or REC/OTR on the Model 28. The REC indicator on the Model 28 turns on, REC and the recording speed appear on the TV screen for a few seconds, and the Model 28 records what you see on the TV screen. REC SP Notes: • You can press PAUSE/STILL to temporarily pause recording (during commercials, for example). To resume recording, press PAUSE/STILL again or press REC. • When you pause the Model 28 while recording, it displays five n marks below PAUSE on the TV screen. Each mark represents 1 minute. While the Model 28 is paused, a mark disappears after each minute, one at a time, until one mark remains. The last remaining mark flashes for 1 minute before it disappears. You can use these marks to see how long the tape has been paused. • If you pause the Model 28 for 5 minutes while recording, it automatically resumes recording to protect the video heads. • To turn off the TV screen while recording, press MONITOR. 5. Press STOP to stop recording. ONE-TOUCH RECORDING (OTR) One-touch recording lets you quickly set the Model 28 to start recording immediately then stop after a length of time you specify (from 30 minutes to 8 hours). 1. Insert a blank cassette, or one that you want to record over, into the cassette compartment. The Model 28 automatically turns on. Note: If a cassette was loaded when you last turned off the Model 28, you must press POWER to turn on the Model 28. 29 16-420.fm Page 30 Tuesday, July 20, 1999 11:32 AM 2. Repeatedly press SPEED on the remote control until the desired recording speed (SP, LP, or SLP) appears on the TV screen. SP 3. Press CH or CH or use the remote control’s number buttons to select the desired channel. 4. Press REC/OTR twice on the front of the Model 28 to begin recording. The REC indicator on the Model 28 turns on, OTR and (0:30) appear on the TV screen for about 5 seconds, and the Model 28 records what you see on the TV screen. To change the displayed total recording time, within 5 seconds repeatedly press REC/OTR to advance the time in 30-minute increments. Note: If you do not press REC/OTR within 5 seconds, the recording time disappears. Simply press REC/OTR again to redisplay the remaining recording time. When you finish entering all OTR information, the displayed information disappears after 5 seconds. OTR Hints • To ensure that you record all of the desired program, you might want to set the recording stop time 30 minutes later than the scheduled end of the program. • You can program OTR information only while a tape is recording. You cannot program OTR information if a tape is not inserted in the Model 28, if the erase- protection tab on the tape is removed, or if automatic timer recording is in progress. • During OTR recording, the remaining recording time is displayed on the TV screen for 5 seconds. • When the recording stop time is reached during OTR recording, the Model 28 turns off. • To turn off the TV screen while recording, press MONITOR. • You can check automatic program timer settings during OTR. See “Auto...