Évaluations - 3, GPA: 5
(
)
)
|
Facilité d'utilisation
To do a complete channel search, check each box that pertains to your TV. For example, if you’re only receiving cable from the CABLE INPUT, highlight Cable Input and press OK to place a checkmark in the box. Select Start to begin the setup. Notes: Channel Search with all options selected takes some time to complete because all possible analog and digital channels are being searched. If a cable box is connected to your TV’s CABLE INPUT or a CableCARD is in use, Channel Search won’t work for Cable Input. 4 Center Speaker In 3 DVI Audio Input 2 Digital Audio Out 1 Fixed/Variable Out 0 Go Back Main Menu Audio Press or to point to an option, then press OK to select it. Press to return to the menu. Connections The TV's internal speakers can be used as a center speaker. To do so, connect an external audio amplifier's center channel output to the Internal Speaker Input on the TV. Then select the matching option from the list above. Warning: Connect from the audio amplifier's center channel output and not a different output. The center channel ouput from an audio receiver. The TV Select the audio source for the TV's internal speakers: 6 Assisted Setup 5 Preferences 4 Connections 3 Parental Controls 2 Audio 1 Picture Quality 0 Go Back Main Menu Press OK orto access the Audio menu. •Signal Strength: Check the signal strength of a channel. •Channel Search: Search for available channels in your area. •Software Upgrade: Check software version and upgrades. •Signal Source: Lost remote? This screen changes inputs. •Video Input Setup: Choose component or composite video. •Auto Tuning: Create one button access to your devices. •Special Features: For advanced users only. •Ethernet Setup: Configure the Ethernet connection settings. The Connections menu has screens for specifying and optimizing the connections (inputs) to the TV: Chapter 4 57 Using the TV’s Menu System Software Upgrade The Software Upgrade screen contains current software information and indicates if a new upgrade is available. The software information and upgrades can be accomplished only if you have the TV connected via the Ethernet cable to the Internet with ISP subscription. Select the Upgrade Now button, if available, to upgrade your software. Note: If using a dialup service via a router connected at a dialup speed of 56K, the Software Upgrade could take several hours or more. If the TV is unplugged during a Software Upgrade, it could cause the TV to not operate properly. Signal Source The Signal Source menu allows you to choose the source from which you would like the signal to come: Cable Input, Antenna Input, or Video Inputs. The same can be accomplished using the component buttons if you’ve set up Auto Tuning on the remote or by pressing the ANT•CAB or INPUT button. But, if you misplace the remote, this feature gives you another way to tune to a signal source. 7 Special Features 8 Ethernet Setup 6 Auto Tuning 5 Video Input Setup 4 Signal Source 3 Software Upgrade 2 Channel Search 1 Signal Strength 0 Go Back Main Menu Connections You can view your current TV-software version and check if a new software version is available. If you have a connection to the TV's Ethernet jack, your TV may periodically alert you to the availability of a TV software upgrade which can be downloaded through the Ethernet jack. From time to time, your cable company may use the Cable Input to automatically upgrade the digital-cable software in the TV. If the TV is on, you'll be notified when it occurs. Status: TV-software upgrade XXXXX is available by selecting the "Upgrade Now" button below. Current TV Software Version and Date: A2.0B/B2.0A Upgrade Now 7 Special Features 8 Ethernet Setup 6 Auto Tuning 5 SViigdneaol ITnyppuet Setup 4 Signal Source 3 Software Upgrade 2 Channel Search 1 Signal Strength 0 Go Back Main Menu Connections You can select the Air/Cable setting for Antenna A and Antenna B. Press OK to continue. Select the Input 4 video source: The component video (Y PB PR) connectors on the TV can be changed to accept composite video instead. When using composite video, connect the yellow RCA cable to the Y/VIDEO connector on the TV. Select the Input 2 video source: Composite Video Component Video (Y PB PR) Composite Video Component Video (Y PB PR) 7 Special Features 8 Ethernet Setup 6 Auto Tuning 5 Video Input Source 4 Signal Source 3 Software Upgrade 2 Channel Search 1 Signal Strength 0 Go Back Main Menu Connections You can select a source from the available signal sources. Press OK to continue. Use this screen if you have misplaced your remote control and need a way to tune to a different antenna or to go to the video inputs. Use the arrows to highlight the rectangle then press OK or MENU-OK to scroll to the input you want. Front Input Video Input Setup The Video Input Setup screen lets you choose which type of connection you’re using for the Input 2 and/or Input 4 jack on the back of the TV. If you decide to change the connection, you need to go back into the Video ...