Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
OPERATIONS Note: . If some digits appear in the corner of the screen when the unit is turned on at the first time, hit [POWER] without unplugging the power cord. REMOTE CONTROL AND FRONT PANEL FUNCTION POWER button To turn TV on/off Channel number buttons CH(ANNEL) K / L buttons MENU button To view on-screen menu GAME button SLEEP button DISPLAY button To display CH No./Audio Status CHANNEL RETURN button To return previous screen MUTE button VOL(UME) K / L buttons To select channels To adjust volume Infrared Sensor Window POWER button To turn TV on/off CHANNEL ^/Ў buttons To select channels VOLUME X/Y buttons To adjust volume MENU button To view on-screen menu AUDIO L/R input jacks VIDEO input jack INSTALLING THE BATTERIES Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. [BATTERY PRECAUTIONS] • Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. • Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. • If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. • Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. 1 2 3 UHF/VHF Rod Antenna (Not supplied) OR HEADPHONE jack INPUT SELECT button To select TV or external input S-Video Cable OR SELECTING AUDIO/VIDEO INPUT When you use the AUDIO/VIDEO input jacks, select “VIDEO1” or “VIDEO2” mode by hitting [INPUT SELECT] on the remote control. The input mode changes by hitting the button as following: • To use the jacks on the rear of the TV, select “VIDEO1”. • To use the jacks on the front of the TV, select “VIDEO2”. INPUT TV channel VIDEO1 (Rear) VIDEO2 (Front) SELECT Note: . The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment. Notes: . When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost. . To cancel the sleep timer, hit [SLEEP] repeatedly until “SLEEP 0” is displayed. . The Sleep Timer Setting display will disappear automatically after 10 seconds of the operation. SLEEP TIMER SETTING 1 2 SLEEP SLEEP SLEEP 0 SLEEP 10 The time increases by 10 minutes up to 90. repeatedly Notes: . The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment. . The S-VIDEO jack is given priority over the VIDEO jack on the rear panel. Note: . For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit. (OUT) (OUT) (OUT) (IN) (IN) (IN) (OUT) (IN) (OUT) (IN) RF Cable RF Cable Flat twin-lead Cable GAME MODE GAME MODE OPERATIONS (Continued) OPTIONAL SETTINGS PICTURE ADJUSTMENT 11 22 MENU CH CH VOL Adjust the setting33 PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION TV SOUND [MAIN] GAME MODE Set to the most suitable position for video games. [-] : OFF [+] : ON BRIGHT Adjust until the darkest parts of the picture are as bright as you prefer. [-] : decrease brightness [+] : increase brightness CONTRAST Adjust to increase or decrease contrast. [-] : decrease contrast [+] : increase contrast Notes: . The display will disappear automatically after 10 seconds unless you press any buttons. . Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, hit [POWER] to turn off the TV and turn it on again after about 30 minutes. CHANNEL SETTING 1 [AUTO PRESET CHANNELS] As the initial setting, this TV has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory. 11 MENU CH CH The tuner scans and memorizes all available channels in your area. PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] VOL 2 Select the desired language CH CH VOL ADD/DELETE AUTO PRESET CH Notes: . The TV distinguishes between standard TV channels and cable (CATV) channels. . The TV may recognize TV channels as CATV channels if reception condition is poor. If this happens, check the antenna connections and try steps 2 to 3 again when reception conditions are better. . If there is no TV sig- nal input, “NO TV SIGNALS” will appear on the display after the completion of channel scanning. NO TV SIGNALS [ADDING/DELETING CHANNELS] You can add or delete channels manually. 33 When the scanning is completed, the lowest memorized channel appears on the TV screen. 11 2 MENU PICTURE Select the channel you wish 4 Note: . The menu will disappear automatically after about 10 seconds. Add: light blue Delete: light red 22 3 Select “PICTURE” [GAME MODE] [BRIGHT] [CONTRAST] [SHARPNESS] [TINT] [COLOR] Select an item to adjust Select [ENG] Select “CHANNEL SET” Select “CHANNEL SET” Select “ADD/DEL...