Évaluations - 4, GPA: 3.8
(
)
)
|
Facilité d'utilisation
To connect a PC, use the PC IN jacks. • Be sure to use only an HDMI cable that bears the HDMI logo. Connect to the S video jack 1 or the video jack 1 or 3, and the audio jacks 1 or 3. To avoid picture noise, do not connect the camcorder to the video jack 1 and the S video jack 1 at the same time. If you connect mono equipment, connect to the L (MONO) jack 1 or 3. Connect to the audio output jacks to listen to the sound from the TV on Hi-Fi audio equipment. To turn off the sound of the TV speakers, set “Speaker” to “Off” (page 29). Connect to the video output jacks to record the image from the TV. Connect to the audio output jacks to record the sound from the TV on the DVD recorder or VCR. PC J Connect to the PC IN jacks. It is recommended to use a PC cable with ferrites. Programing the remote If you have Sony VCRs/DVDs and Sony DVD Home Theater Systems/Amplifiers, do the following procedure to program the remote so that you can operate them using this remote. Note Before you start, look up the three-digit code for your equipment from the “Equipment’s codes” on page 38. 1 2 1 3 1 Press and hold the DVD, VCR or AMP function button you want to program on the remote, then press , keeping the function button pressed down. The selected function button (DVD, VCR or AMP) will flash. 2 Press the number buttons to enter the three-digit code while the button is lit. If code is not entered within 10 seconds, you must perform the step 1 again. 3 Press . When the programing is correct, the selected function button will flash twice, and when not, it will flash five times. Using Optional Equipment Continued 37 GB 4 Switch on your equipment and check that the following main functions work. H (playback), x (stop), m (rewind), M (fast forward), channel selection for both VCR and DVDs, TOP MENU/MENU and F/f/G/g only for DVDs. If your equipment is not working, or some of the functions do not work Enter the correct code or try the next code listed. To return to normal TV operation Press the TV function button. Equipment’s codes Equipment Code VCR 001*, 002, 003, 004 DVD 101*, 151, 201, 202, 203 Amplifier 301, 302, 303, 304, 401*, 402, 403, 451 * Factory setting 38 GB Additional Information Replacing the lamp The Projection lamp, like all lamps, will eventually lose brightness and functionality which affects the overall performance of your TV. How long the Lamp maintains its brightness will vary depending upon your usage and environmental conditions. To maintain the quality of your viewing experience, Sony recommends that you replace the Lamp (1) when the screen becomes dark or the color looks unusual; (2) when on the front of the TV flashes; (3) after approximately 8,000 hours of use (for KS-60R200A/ 50R200A) or 4,000 hours of use (for KS-70R200A); or (4) when the lamp replacement message appears on the TV screen. WARNING Electric appliances can cause fire or high temperature, resulting in injury or death. Be sure to follow the instructions below. • Use a Sony XL-5100 replacement lamp (for KS60R200A/ 50R200A, not supplied) or XL-5300 replacemant lamp (for KS-70R200A, supplied) for replacement. Use of any other lamp may damage the TV. • Do not remove the lamp for any purpose other than replacement. Doing so may cause injury or fire. • Do not put flammable materials and metal objects inside the lamp receptacle of the TV after removing the lamp. Doing so may cause fire or electrical shock. Do not touch the lamp receptacle once the lamp has been removed. • When the lamp eventually burns out, you may hear a noticeable “pop” sound. This is normal and it is inherent to this type of lamp. • In rare instances, the bulb may pop inside the lamp unit, but the lamp unit is designed to contain all of the broken glass pieces inside the lamp unit. • This TV’s lamp contains mercury and should be disposed of properly. Consult your local authorities regarding safe disposal. The material contained in this lamp are similar to those of a fluorescent lamp, so you should dispose of it in the same way. 1 Switch off the TV. Wait several minutes, then unplug the power cord. (The cooling fan will continue to operate for about two minutes after switching the TV off.) 2 Wait at least 30 minutes after unplugging the power cord to allow the lamp to cool down before replacing it. To avoid being burned, do not touch the lamp receptacle once the lamp has been removed. 3 Take the new lamp out of its package. Do not touch the glass portion of the new lamp. Notes • Do not shake the lamp. Vibration can damage the lamp or shorten its life. • Avoid touching the front glass of a new lamp or the glass of the lamp receptacle. This may reduce picture quality or lamp life. 4 Remove the outside lamp cover. For KS-60R200A/50R200A, turn the screw with a screwdriver counterclockwise and remove the cover. For KS-70R200A, release the clamp and remove the cover. KS-60R200A/50R200A KS-70R200A 5 Remove the lamp door. (For KS-70R200A) Turn the screw counterclockwise, and then turn th...
Ce manuel est également adapté pour les modèles :TV - BRAVIA 2-691-651-13(2) (5.07 mb)
TV - BRAVIA KS-50R200A (5.07 mb)
TV - BRAVIA KS-60R200A (5.07 mb)