Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
3. Demagnetisation The earth’s magnetic field may affect your television set, causing coloured patches to appear on the screen. If this happens: · Switch off the set using the ON/OFF button. · Wait about an hour and then switch on again using the ON/OFF button. This operation demagnetises the screen automatically. If coloured patches are still visible, repeat the procedure. GB NINGS. 1 GB 2 Connections 220 - 240V ~ 50Hz 1. Aerial Socket Enables connection of the aerial and, if required, a video recorder (see manual for latter). To tune the channel reserved for your video recorder, start up the recorder then carry out MANUAL CHANNEL SETTING operations. Store at any programme ending with a 9 (9,19,29, etc.) Each time you use the video recorder, switch to the channel assigned to it. 2. SCART Socket This is used to connect: GB – a VHS, 8 MM, S–VHS or Hi–8 video recorder or camcorder, – a PAY TV decoder, – a video games console. To use the connected device, select the audiovisual programme by pressing the button. This selection is automatic for some devices. AV is displayed at the bottom of the screen. If youhaveanS-VIDEO device, press the button again. S-VIDEO is then displayed at the bottom of the screen for a few seconds. When you switch off the device and if you have not changed channel during play, the TV set automatically returns to the previous channel. If the TV set has been switched on by the video recorder, it will be placed on stand–by when the video recorder is switched off. 3 Remote Control GB Batteries: Remove the lid at the back of the remote control and insert two 1.5 V, LR06 batteries. 8 Display programme No. and sleep timer (Yellow button) Display Timer Menu (Green button) Call up personal adjustments (Red button) Confirm anactionor validate a menu option To switch to connected equipment (e.g.: video recorder) To leaveamenu Sound mute Volume level Stand-by Inactive Inactive Adjustment: move to Right/Left in menus and select one of the proposed options Move Up and Down in the menus To go to Picture and Channel Adjustment menus Direct access to programmes and entering numerical values in menus To change programme ”Please respect the environment! Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling..” 4 Automatic Channel Setting This set is equipped with an automatic search system which will search for and store all channels available in your region. To help identify the programmes, we suggest that you have to hand a TV guide or daily newspaper. Ensure that the aerial lead is connected to the TV set. Check that any equipment connected only via the aerial (video recorder or satellite equipment) is operating. Switch off any equipment connected via the SCART socket. Installation Press the ON/OFF button, the indicator lamp lights up. If the television set remains on stand–by, press one of the buttons on the remote control numerical keypad. When the television set is turned on for the first time, the Installation menu appears automatically. If this is not the case, you can call it up by: GB AUTO INSTALL. EURO – pressing the button on the remote control three times. Press to confirm. A new menu appears. Automatic search begins. The cursor moves from left to right on the VL line, then on the VH line and then on the U line. The channels found are stored in memory in order starting from programme PR 01. You can stop the automatic search at any time by pressing the button. The search stops automatically at the end of the U band or when 99 channels have been found. PR01 AUTO INSTALL. VL EURO The Programme Organizer menu then appears automatically. The channel stored on programme PR 01 is selected (see next page). 5 Changing a Programme Number Select the channel number to be changed using the button. Using the numerical keypad on the remote control, enter the new programme number. GB You can also use the buttons on the remote control. PR01 AUTO INSTALL. VL EURO Press the button to confirm the change. The programmes stored under the old and new numbers are then swapped. Repeat this operation to change other programme numbers. Erasing a Programme Select the programme to be erased using the button. Enter 0 or 00 on the numerical keypad of the remote control. Press to confirm. The programme is erased. Check that all the programmes are in the required order using the button, then press to leave the menu. 6 GB Manual Channel Setting Press the button twice to call up the channel setting menu. 1. Channel Search Select the 2nd line of the menu using the button. Start the search by pressing: – the button for a forward search, – the button for a backward search. Thesearchful llycoverstheVL,VHandUbandsstarting fromthechannelonthescreen.Thecursormovesand assoonasachannelisfound,thepictureappearson thescreen. VL PR EURO Waitforthemenutogotothebottomofthescreenforoptimumreception. Ifthepicturecorrespondstothechannelrequired,gotothe4thline(PR),otherwise continu...
Ce manuel est également adapté pour les modèles :TV - 14MG10F (457.1 kb)