Évaluations - , GPA: ( )

Instructions Epson, Modèle EMP-1715/1710

Fabricant : Epson
Taille : 1.47 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

• If the air filter is clogged, clean or replace it. s p.54, 59 Replace Lamp Replace it with a new lamp. s p.56 If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may explode increases. Replace it with a new lamp as soon as possible. Orange q q • If the projector is not operating properly, even though the indicators are all showing normal, refer to "When the Indicators Provide No Help" ( sp.45). • If an indicator is displaying a status not described in the tables, contact your local dealer or the nearest address provided in the World-Wide Warranty Terms. sInquiries Problem Solving 45 When the Indicators Provide No Help If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem. Problems relating to images fNo images appear Problem Solving 45 When the Indicators Provide No Help If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem. Problems relating to images fNo images appear sp.46 Projection does not start, the projection area is completely black, the projection area is completely blue, and so on. fMoving images are not displayed sp.46 Moving images being projected from a computer appear black and nothing is projected. fProjection stops automatically sp.46 fThe message "Not supported." is displayed sp.47 fThe message "No Signal." is displayed sp.47 fImages are fuzzy or out of focus sp. 47 fInterference or distortion appears in images sp. 48 Problems such as interference, distortion, or black & white checked patterns appear. fThe image is truncated (large) or small, or the aspect is not suitable sp.48 Only part of the image is displayed, or the height and width ratios of the image are not correct, and so on. fImage colours are not right sp.49 The whole image appears purplish or greenish, images are black & white, colours appear dull, and so on. (Computer monitors and LCD screens have different colour reproduction performance, so that the colours projected by the projector and the colours appearing on the monitor may not necessarily match, but this is not a sign of a problem.) fImages appear dark sp.49 Other problems f No sound can be heard or the sound is faint s p.50 f The remote control does not work s p. 50 f Mail is not received even if an abnormality occurs in the projector s p.51 Problems when projection starts f Power does not turn on s p.49 Problem Solving 46 fProblems relating to images fNo images appear fMoving images are not displayed Check Remedy Did you press the [Power] button? Press the [Power] button to turn the power on. Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally. Connect the projector's power cable correctly. sQuick Start Guide Check that your electrical outlet or power source is functioning correctly. Is A/V Mute active? Press the [A/V Mute] button on the remote control to cancel A/V Mute. sp.16 Is the A/ V mute slide closed? Open the A/V mute slide. Are the configuration menu settings correct? Reset all of the settings. s"Reset"-" Reset All" p.39 Is the projected image completely black? Some input images, such as screen savers, may be completely black. Is the image signal format setting correct? Change the setting according to the signal for the connected equipment. s"Signal" -"Video Signal" p.33 Check Remedy Is the computer's image signal being output to the LCD and the monitor? Change the image signal to external output only. s Check your computer's documentation. Only when projecting computer images Only when projecting images from a video source Only when projecting images from a laptopcomputer or a computer with a built-in LCD screen f Projection stops automatically Check Remedy Is "Sleep Mode" set to "On"? Press the [Power] button to turn the power on. If you do not want to use "Sleep Mode", change the setting to "Off". s"Extended"-"Operation"-"Sleep Mode" p.36 Problem Solving 47 fThe message " Not supported. " is displayed Check Remedy Is the image signal format setting correct? Change the setting according to the signal for the connected equipment. s"Signal" -"Video Signal" Problem Solving 47 fThe message " Not supported. " is displayed Check Remedy Is the image signal format setting correct? Change the setting according to the signal for the connected equipment. s"Signal" -"Video Signal" p.33 Do the image signal resolution and the refresh rate correspond to the mode? Refer to the computer's documentation for how to change the image signal resolution and the refresh rate output from the computer. s"List of supported monitor displays" p. 70 Only when projecting images from a video source Only when projecting computer images f The message " No Signal." is displayed Check Remedy Are the cables connected correctly? Check that all the cables required for projection are securely connected. sQuick Start Guide Is the correct input...