Évaluations - 1, GPA: 3 ( )

Fabricant : JVC Taille : 356.21 kb Nom Fichier : Langue d'enseignement:

• This unit does not come with anchor bolts for securing it to walls, etc. Be sure you have materials on hand as appropriate for the mounting location. • This task must be performed by at least two persons when attaching the Plasma display to the wall mounting unit. Mounting the Wall Unit Warning x10 ¦ The Wall Mounting Unit should be mounted to a wall that can adequately hold the total weight of the plasma display and the Wall Mounting Unit over a long period of time and which can adequately withstand earthquakes, conceivable vibrations, and other external forces. Improper installation may cause the plasma display to fall down, resulting in physical injury. • Mounting On Wooden Walls The weight of the unit should be borne by the wall posts or studs, and these should be reinforced if insufficiently strong. Do not install the Wall Mounting Unit on walls made of plasterboard or thin plywood. Use the commercially sold screws best suited for the wall structure and material. • Mounting On Concrete Walls Use commercially sold wall anchors capable of supporting the weight of the plasma display. ¦ Do not install the Wall Mounting Unit in a location which is hot or humid or which may become wet, as the presence of excessive moisture may lead to fire or electric shock. ¦ Do not install the Wall Mounting Unit near the blower or air inlet of an air conditioner. ¦ Do not install the unit in a location with a large amount of dust, soot, or cigarette smoke, as this may lead to fire. ¦ Do not block the ventilation holes, and be sure to leave sufficient space around the unit for ventilation. Inadequate ventilation may cause the unit interior to overheat, leading to fire. Minimum 20 cm Minimum 15 cm ¦ Do not install the Wall Mounting Unit on a non- vertical wall. The unit interior may overheat, resulting in fire, or the unit may fall down, causing physical injury. ¦ Do not install the Wall Mounting Unit in a location subject to frequent vibration, impact or other external forces. The unit may fall down or be damaged, causing physical injury. ¦ Do not install the unit in a ¦ Do not install the unit in a location exposed to location where people direct sunlight or strong may hang on it or lean light, as viewing the against it. plasma display in an Doing so may cause the overly bright unit to fall down or be environment can be tiring damaged, resulting in injury. for the eyes. ENGLISH Caution • Consult authorized service personnel for electrical work. Using power cords damaged during installation (i.e., exposed or severed wiring) may result in fire or electric shock. • Conduct the work with adequate working space. Damage or bodily injury may result from working under unsuitable conditions. • Avoid mounting this unit in areas where there is electrical wiring or water pipes, as fire or electric shock may result. Instructions for using the Wall mounting unit In order to secure the Plasma Panel and Wall mounting units correctly, please refer to the attached Location Shee...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :