Évaluations - 3, GPA: 4.3 ( )

Fabricant : Haier Taille : 1.63 mb Nom Fichier : Langue d'enseignement:

When having selected SAP button on the remote control, this TV can only receive the signal when the TV station transmits the proper signals. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to mono sound during stereo/SAP broadcasting. Stereo or SAP can be received in a Analog channel. 1. Use the SAP button to select your desired MTS mode in a analog signal. Each time you press the SAP button, Mono, Stereoor SAP appear. If other languages are available on the digital signal, select them with the SAP button. 2. Press EXIT button to save and return to TV viewing. Menu Operations Menu Operations Channel Menu Options 1. Press MENU button and CH+/CH-until the following menu appears on the screen. Video Tuner Antenna Audio Channel Channel Scan Channel Skip Channel Label Function Lock Channel Select BackEXITCH+/- VOL+/- Note: Channel menu will appear in main menu only in TV mode. 2. Press VOL+/OK button to enter the Channel menu and CH+/CH- to go up and down to select the desired option . 3.Press VOL+/OK button to confirm and VOL+/VOL-increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired quality has been achieved . Function: Tuner: Press VOL+/OK button to selectAntenna or Cable . Channel Scan: Press VOL+/OK button to start to scan, pressEXIT to cancel Status: Scanning... Antenna Analog Channels: 4 Audio Video Digital Channels: 3 Channel Function Lock 40% EXIT Cancel Channel Scan All channels now available will be automatically preset in order .After the search has finished, the first program number will display on the screen. This search automatically adds only the active channels in your area to the TV's memory. It deletes any channels on which there is no broadcast or a poor signal. The channels found are automatically saved. Menu Operations Menu Operations Channel Menu Options Continued Channel Skip: Press VOL+/OK button to enter the submenu then press CH+/ CH- to select the channel number (eg.2) and press OK to confirm, a mark will be display in the pane as follows and this channel will be skipped next time you press CH+/CH-but you can press digits button to select the channel. If you want to resume the channel, press OK button again. Video Audio Channel Lock Function 2 Analog 3 Analog 4 Analog 5 Analog 5-1 Digital 6 Analog 7 Analog 8 Analog 9 Analog 10 Analog Channel Skip OK Set Select EXIT BackCH+/VOL+/ Channel Label: Allows you to name the channel that is selected. Press VOL+/OK button to enter the submenu. Video Audio Channel Lock Function Channel Index Channel Label 1 Channel Label Set Select EXIT BackCH+/VOL+/ Then press CH+/CH-to select Channel Index and Channel Label and VOL+/VOL- to select the position of the item that you want to change, afterward press TV/AV to input the numbers and symbols and OK button to confirm. Menu Operations Menu Operations Function Menu Options 1. Press MENU button and CH+/CH-until the following menu appears on the screen. Video Audio Channel Lock Function Language English OSD Timeout OSD TransparenScreen Mode Blue Screen DPMS Time Setup Closed Caption Default Short cy Middle Full screen On On Function Select EXIT BackCH+/VOL+/ 2. Press VOL+/OK button to enter the Function menu and CH+/CH- to go up and down to select the desired option . 3.Press VOL+/OK button to confirm and VOL+/VOL-increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired quality has been achieved . Function: Language: Press VOL+/VOL-button to select language of the OSD. OSD Timeout: Press VOL+/VOL-to select Middle, Short and Long to change the time of the OSD display. OSD Transparency: Press VOL+/VOL-to select among Low, High and Middle to change the transparency of the OSD. To select Low, the OSD is opacity. Screen Mode: Press VOL+/VOL-to select among Full Screen, Normal, Wide, Zoom and Cinema to change the display mode. ( display mode may differ from different inputs) Blue Screen: Press VOL+/VOL-to select On , the screen will be in blue after3 seconds if there is no signal. DPMS: PC Power Management. To set On, the set will be in standby mode automatically if no signal in 2 minutes; if signal input , the set will be on again automatically. Time Setup: Press VOL+/OK to enter the submenu. Time Zone: Press VOL+/VOL- to select the appropriate time zone. Menu Operations Menu Operations Function Menu Options Continued Video Audio Channel Lock Function Time Zone Central Date/Time Sleep Timer Off Time Setup Select EXIT BackCH+/VOL+/ Date/Time: Press VOL+/OK to enter the submenu. Video Auto Off Date Audio Channel TimeTimerOn Time 00:00 On 00:00 Lock Function Off Time 00:00 Date/Time SelectCH+/VOL+/ EXIT Back AUTO: Press VOL+/VOL- to select On or Off . When AUTO mode on , the time can not be adjusted. Select Off , you can operate to set the time manually. Date: Press VOL+/VOL- t...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :