Évaluations - 4, GPA: 3.8 ( )

Fabricant : Hitachi Taille : 3.74 mb Nom Fichier : Langue d'enseignement:

• Do not press two or more buttons at the same time unless instructed to do so. • Do not allow unit to get wet or become heated. • Avoid dropping on hard surfaces. • Do not use harsh chemicals to clean. Use only a soft, lightly moistened cloth. • Do not mix new and old batteries. • Do not heat, take apart or throw batteries into fire. • Use only AAA alkaline batteries. Sleep Timer Setting the Sleep Timer: 1. Press SLEEP on the remote control. 2. Each press of SLEEP increases the time displayed by 30 minutes, until the maximum value of 120 minutes is reached. 3. After 5 seconds of inactivity, the message will disappear. 4. Press SLEEP to view the remaining time before the timer turns the TV off. Canceling the Sleep Timer: 1. Press SLEEP to display the on-screen message. 2. Press SLEEP repeatedly until OFF is displayed. Note: After 5 seconds of inactivity, the message box disappears. .................................................... Figure 2. Operation: Installing the Batteries NetCommand® On-Screen Buttons To use the TV’s NetCommand feature, the manufacturers of the devices that are connected to the television need to be defined during the Initial NetCommand setup. The TV can also learn the remote control IR code signals for most non-defined devices. During the initial setup, every available device is assigned to a specific input of the TV and/or A/V Receiver. Changes to the inputs or names are made through the Edit NetCommand screens. The buttons described below will help you navigate the screens. On your remote control, the ADJUST and buttons allow you to navigate left and right to different selections on the screen. The ADJUST and buttons allow you to: • Change the radio button • Change current text box selection • Navigate up and down on the screen The ENTER button allows you to: • Confirm the selected character when naming a device • Add or delete check marks in check boxes • Select on-screen buttons to change screens Textbox Press ADJUST or to make a selection. Checkbox Checkmarks indicate the item or input is added or turned On. Press ENTER when the Checkbox is highlighted to add or delete a checkmark. When viewing the Review screen, a Checkbox reflects which devices are turned On or Off, or connected to the TV. Control Buttons Much like the software on your computer, you will use graphic buttons to navigate through the NetCommand Setup screen. Highlight the button and press ENTER to select the function. Button Use the Next> button to navigate forward to the next screen. Cancel Button The Cancel button will stop any changes you are currently making without saving them into memory. When you select the Cancel button, NetCommand will prompt you to confirm that you want to cancel the changes you are currently making. If you select Cancel during Initial Setup. You can setup NetCommand later by selecting the NetCommand menu, then choosing Initial. Radio Button The setting changes when one of the choices is highlighted. 3D Graphical Menu System Your TV also has Mitsubishi’s exclusive 3D Graphical on-screen operating system, which provides on- screen information for menu choices and changes, using the TV’s remote control. Remote Control Buttons The following buttons on your remote control help you navigate within the system : 1. ADJUST or to select the menu item you want to change. 2. ADJUST or to change the settings. 3. ENTER(EXCH) to enter into a menu, start an automatic function or select a checkbox. 4. CANCEL(SUB) to clear a setting or stop an automatic function. 5. TV MENU to display the main menu or move back one menu screen at a time. 6. HOME to exit all menus and return to TV viewing. Menu Screens A picture (icon) will be highlighted on the menu screen when selected with the ADJUST arrows. You may then make changes within the menu or access sub-menus, if available. You can also access sub-menus from a button. Sometimes when you select a button, an automatic function begins. The system includes the following special features: • The currently selected icon or button is highlighted with a yellow outline; the text color is yellow. • On-screen instructions, shown in the message line at the bottom of the menu, provide feature selection and adjustment information. • Some on-screen menu options must be set before other options are available. TVMENUDEVICEMENUEXCHENTERADJUSTHOMEINFOV-CHIPFORMATPIPCHPIP/POPPIPDEVICECANCELSUB Main Menu: This screen will always be the first screen that appears when you press the remote’s TV MENU button navigation buttons Press ADJUST or to change text boxes. Some text boxes have preset labels. Other boxes allow you to select letters, numbers or characters to customize names. When customizing names, press ADJUST or to select letters, numbers or characters. Press ENTER to move to the next character position. Use CANCEL to erase letters, numbers and characters or move one space backward. NetCommand® I...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :