Évaluations - 2, GPA: 4.5 ( )

Fabricant : Hitachi Taille : 6.35 mb Nom Fichier : Langue d'enseignement:

4. Press ENTER to add a check mark next to the highlighted FAV bank. 5. Repeat steps 2–4 for additional channels and FAV banks. Removing FAV Channels Using the 1. With the Channel menu displayed, press CH / to display the memo- Menu rized channel you wish to remove. 2. Highlight the desired FAV memory bank (FAV1–FAV9). 3. Press ENTER to remove the check mark. Using FAV Channels Viewing FAV Banks 1. Press the FAV key. Wait for the TV to tune to a channel in the current FAV bank. 2. Press the FAV key repeatedly to cycle through the channels available in the current FAV bank. Changing FAV Banks 1. Press the FAV key. Wait for the TV to tune to a channel in the current FAV bank. 2. When tuning is complete and while the TV status display is still visible on screen, press the number key for the desired bank. Note: Wait for the channel change to finish before pressing the number key. Otherwise, the TV may ignore the FAV number. If No FAV Banks Are Set Up The FAV key switches to the previously tuned channel; works like the QV key. FAV Setup Using Only the Remote Control Adding FAV Channels 1. While watching TV, tune to the channel you want to add to the current FAV memory bank. See the instructions above if you need to first change to a different FAV bank. 2. Press and hold the FAV button for about 2 seconds. When FAV and the memory bank number appear under the channel number, the channel has been successfully added. Removing FAV Channels 1. While watching TV, press the FAV button This procedure removes the channel 2. While the TV status display is still visible on screen, press the number key only from the selected bank and for the memory bank. leaves the other banks unchanged. 2. Press the FAV button repeatedly until you see the desired channel. 3. While the channel number and FAV indicator (with correct bank number) are still displayed on the screen, press CANCEL. You must press CANCEL before the indicator disappears. When the FAV indicator disappears, the channel has been successfully removed. Chapter 5. TV Menu Settings Captions Menu For analog channels, broadcasters can send either standard closed captions or text service. Standard closed captions follow the dialogue of the characters on screen and display in a small section of the screen. Text-service closed captions often contain information such as weather or news and cover a large portion of the screen. For digital channels, broadcasters can send up to six different captioning selections or can send analog captions that are the same as those sent by the analog station. Each TV station may broadcast only one or two types of captions or none at all. The TV cannot decode closed captions received on component or HDMI inputs. Figure 7. Captions menu Analog Captions The TV can display one of the following captions for analog sources: • CC1, CC2, CC3, or CC4: standard closed-caption signals • Text1, Text2, Text3, or Text4: Text-service signals • On if mute: Closed captions appear when audio is muted. When selected, press MUTE on the TV remote control to turn on/off the standard closed-caption signal CC1. • Off: No closed captions. Background To make the analog closed captions easier to read, you can choose to display the background color as either black or gray behind the text. IMPORTANT When analog text closed captioning is selected, a large black or gray box appears on your TV screen if no signal is broadcast. Digital Captions The following display options are available for digital sources: • Captions 1–6: Sent by broadcaster. • On if Mute: Closed captions are displayed when audio is muted. When selected, press MUTE on the TV remote control to turn captioning on/off (Caption 1). • Off: No closed captions. Note: For digital programs, if the broadcaster is sending only analog captions converted to digital format, then the analog caption settings apply. Appearance The closed-captions provider selects the default options when sending digital closed captions. Select Custom to override defaults and customize the appearance of closed captions. These settings do not apply to analog closed captioning converted to digital. Digital Settings The Digital Settings menu allows you to customize the appearance of the closed captions sent by the broadcaster. Digital settings do not apply to analog closed captions converted to digital. To open the Digital Settings menu, select Custom for the Appearance option. Move the highlight to the Digital Settings icon and press ENTER. Figure 8. Closed Captions, Digital Settings sub-menu Font The available font options are as follows: • Default: Selected by the closed-captions pro- vider • Font 1: Monospaced font with serifs • Font 2: Proportionally spaced font with serifs • Font 3: Monospaced font without serifs • Font 4: Proportionally spaced without serifs • Font 5: Casual font • Font 6: Cursive font • Font 7: Small capitals Chapter 5. TV Menu Settings Captions Menu, continued Size Select the desired font size. Large is the recommended fo...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :