Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
The correct connections are: A. Y to Y B. Cb or Pb to Pb C. Cr or Pr to Pr 2. Connect a set of audio cables from AUDIO OUT on the back of the DVD player to COMPONENT AUDIO Input (1 or 2) on the TV back panel. • The red cable connects to the R (right)channel • The white cable connects to the L (left) channel NOTE: Some video game systems support component connections. Please refer to your video game console Owner’s Guide. TV back panel (section detail) Any S-Video Device <§L 0R m Figure 10. Connecting an S-Video Device. NOTE: If your DVD player supports progressive scan playback, be sure to set your player accordingly. You will also want to set your player to display 16:9 widescreen. Please refer to your DVD player’s Owner’s Guide. Other S-Video Device (Figure 10) 1. Connect an S-Video cable from VIDEO OUT on the device back panel to VIDEO INPUT-1 or INPUT-2 on the TV back panel. 2. Connect a set of audio cables from AUDIO OUT on the device back panel to AUDIO INPUT-1 or INPUT-2 on the TV back panel. • The red cable connects to the R (right) channel • The white cable connects to the L (left) channel If your S-Video Device is mono (non-stereo), connect only the white (left) cable. 18 Connecting a DTV Receiver Note: The TV back panel and connections shown here are for reference only and may vary by model. DTV Connectors and Adaptors (Figure 11) The TV back panel has five RCA-type connectors for the DTV connection. The back panel of your DTV receiver may use RCA-type connectors or BNC-type connectors. If your DTV receiver comes with BNC type connections, you will need to purchase BNC to RCA adaptors to connect the TV to the DTV receiver. These adaptors should be available at most electronic supply stores. Figure 11. DTV connectors and adaptors. DTV Receiver with Component Video Connections (Recommended) (Figure 12) 1. Connect the outside antenna cable, or satellite to ANT or SATELLITE IN on the DTV receiver (see your DTV receiver owner’s guide for instructions and cable compatibility). 2. If your DTV receiver has a built-in terrestrial tuner, connect the incoming terrestrial antenna to ANT on the DTV receiver. If your DTV receiver does not have a built-in terrestrial tuner, this TV will only be able to provide an analog signal through Ant-A on the TV back panel. 3. Connect the RCA-type cables from the DTV receiver outputs to DTV INPUT Y/Pb/Pr on the TV back panel. You may need to set the DTV Input Assignment to Y/Pb/Pr. (see page 35 for WT-42413 or page 38 for WS-48413, WS-55413 or WS-65413) 4. Connect the L (left) and R (right) audio cables from the DTV receiver to DTV AUDIO on the TV back panel. 5. To utilize the benefits of a digital A/V receiver, connect your DTV receiver’s digital audio out to a digital input on your digital A/V receiver. Component (1 and 2) may also be used for 1080i components. \ IMPORTANT I See Appendix B, page 67 for component video signal compatibility information. For digital audio connections, see your DTV receiver and A/V receiver Owners Guides. TV Back Panel (section detail) Figure 12. Connecting the DTV receiver with component Video Connections. 19 Connecting a DTV Receiver, continued Note: The TV back panel and connections shown here are for reference only and may vary by model. TVBack Panel (section detail) Figure 13. Connecting the DTV receiver with RGB video connections. I IMPORTANT I DTV Receiver with RGB Video Connections (Figure 13) 1. Connect the outside antenna, cable, or satellite to ANT or SATELLITE IN on the DTV receiver (see your DTV receiver owner’s guide for instructions and cable compatibility). 2. If your DTV receiver has a built-in terrestrial tuner, connect the incoming terrestrial antenna to ANT on the DTV receiver. If your DTV receiver does not have a built-in terrestrial tuner, this TV will only be able to provide an analog signal through Ant-A on the TV back panel. 3. Connect the RGB cables from the DTV receiver to the TV back panel as listed below (if your DTV receiver uses BNC-type cables, use the adaptors shown in Figure 11, page 19): DTV Receiver TV Back Panel G (green) B (blue) R (red) Y/G Pb/B Pr/R 4. If the DTV receiver has outputs for H and V sync, connect as listed below (DO NOT connect if DTV receiver uses “Sync on Green”): H (horizontal sync) = H V (vertical sync) = V 5. Connect the L (left) and R (right) audio cables from the DTV receiver to DTV AUDIO on the TV back panel. 6. To utilize the benefits of a digital A/V receiver, connect your DTV receiver’s digital audio out to a digital input on your digital A/V receiver. You may need to setup the DTV (See Input Assignment, page 35 for WT-42413 or page 38 for WS-48413, WS-55413, WS-65413) to RGB. _» See Appendix B, page 67 for component video signal compatibility information. -► For digital audio connections, see your DTV receiver and A/V receiver Owners Guides. 20 Connecting MonitorLink™, NetCommand® IR Emitter Note: The TV...
Ce manuel est également adapté pour les modèles :TV - ws-48413 (4.66 mb)
TV - ws-48413 (4.66 mb)
TV - ws-55413 (4.66 mb)
TV - ws-48413 (4.66 mb)