Log:
Évaluations - 4, GPA: 4.5 ( )

Instructions Panasonic, Modèle CT3268S

Fabricant : Panasonic
Taille : 1.5 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


When less than six Remote button functions are entered, press the MULTI button to end the program mode. (Waiting more than 30 seconds without pressing another button will also end the program mode.) The following is an example of Remote functions that can be programmed into the MULTI button. - TV Power - For turning TV ON and OFF, - VCR Power - For turning VCR ON and OFF (selected brands after programming it’s Infrared access code, if necessary). Both can be turned ON or OFF with one press of the MULTI button. POWER VCR POWER MULTI To delete entered functions - Repeat step 3. Now you can enter from one to six different Remote functions. NOTE: You can also program the MULTI button to perform most individual Remote Control button functions. Buttons which continuously perform a function as long as pressed (Volume Up/Down, Channel Up/Down, etc.) cannot be programmed. Only those buttons which perform a function when initially pressed (Power On/Off, Mute, Direct Channel Entry, etc.) can be programmed. Cable Power Button (for CT-3268S) CABLE POWER The CD on the Remote Control has been designed to operate selected brands of Cable Television Converter boxes. The proper cable television converter box infrared code must be obtained prior to use. (Please refer to Programming the Universal Remote for programming instructions.) The Remote Control TVA/CR/CABLE switch should be in the CABLE position. NOTE: The A or ^ on the Remote may be used for selecting Cable Converter box channels. PIP (Picture in Picture) Button This feature allows the viewer to monitor one channel program while watching another. The monitored source (PIP) must be a different video source (such as a VCR) when connected to the input jacks. • When the Main Picture is in Video mode with no signal, the PIP will not operate properly. PIP Operation 1. Turn VCR ON and select a desired channel. 2. Press the TV Mode Selection button to operate TV Remote functions, if necessary (some models). 3. Press the PIP button (set must be ON). The PIP frame will appear at the position it was last displayed. The Main Picture Video Source and PIP Video Source will display on screen momentarily. Audio will be that of Main Picture. 4. Press the PIP button again to cancel PICTURE IN PICTURE feature (if desired). NOTE: For PIP Video source connection, refer to the PIP Operation Using VCR As second Tuner section. -18- Special Functions (cont.) Swap Button Press the SWAP button (when the PIP frame is displayed) to interchange what is being viewed on the Main Picture with that of the PIP frame. SWAP Freeze Button Press the FREEZE button to stop action in the PIP frame. FREEZE CH 2 PI P VI DEO 1 I VIDEO 1 PIP CH 2 NOTE: Audio will be that of Main Picture. Main Picture Freeze Frame Size Button Press the SIZE button (when the PIP frame is displayed) to choose either the large or small PIP frame. NOTES: • Pressing the FREEZE button when the PIP frame is not displayed, will stop action in the Main Picture and display it within the PIP frame. • Pressing the FREEZE button when PIP frame is displayed, will stop action in the PIP frame. Press the FREEZE button again to continue action. • Press the PIP button to delete PIP frame. Move Button The PIP frame may be located at any corner of the Main Picture by pressing the PIP MOVE button (when the PIP frame is displayed). MOVE NOTE: Each time MOVE button is pressed (when the PIP frame is displayed), the PIP frame will move counterclockwise as illustrated. -19- Main Menu Icons NOTE: When Auto Power On feature is activated, Timer Icon will change to an Exit Icon. Display and Exit Menus A ^vo£) w Located On Remote Control CH BUTTONS Highlight Desired Feature when Menu is Displayed VOL BUTTONS Selects or Adjusts Features when Menu is Displayed Menu Language Selection The MENU LANGUAGE is factory set to ENGLISH. Follow the instructions to change the Menu Language to SPANISH, FRENCH, and back to ENGLISH. 1. Press (EÜ3). 2. Pressé or W and^or^ to highlight the Set-Up Icon.. 3. Press & to display the Set-Lip Menu. SET-UP AUTO PROG \ NO MANUAL PROG ^ NO AUTO POWER ON OFI ENGLÍSH ESPAÑOL FRANÇAIS 4. Press A or W to highlight ENGLISH, ESPAÑOL, FRANÇAIS. 5. - Press ^ or ^ to select ENGLISH, ESPAÑOL, FRANÇAIS. 6. Press (ES twice to exit menus. or 1. Press 2. Press A or ^ and ^ or to select the desired Icon. 3. Press (HH after selecting the desired Icon to access sub menus. 4. Press dggJ twice to exit sub menus or press (S3 once while the EXIT Icon is highlighted to exit Main Menu. -20- Picture Adjustments Picture Norm Use to reset Color, Tint, Brightness, Picture, and Sharpness adjustments back to a factory preset level. 1. Press G9. 2. Press A or and ^ or B^ to highlight the Picture Icon. 3. Press (ESS) to display the Picture Adjustment Menu. 4. Press A or to highlight PICTURE NORM. 5. Press ^ or B^ to select “SET’ to normalize Color, Tint, Brightness, Pictur...

Ce manuel est également adapté pour les modèles :
TV - CT32S21 (1.5 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories