Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
Caution•Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output. •External speakers cannot be connected directly to OUTPUT terminals. •When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSC channel is selected, the output will be PCM. Control with HDMI “HDAVI ControlTM” HDMI connections to some Panasonic equipment allow you to enjoy easy playback. •Setup the equipment to enable this function. Read the manual of the equipment.•Switch the TV unit on again with the equipment on when connection or setup is changed. •This function may not work normally depending on the equipment condition.•The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode. •Image or sound may not be available for the first few seconds when the playback starts.•Image or sound may not be available for the first few seconds when Input mode is switched. HDMI connection HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting the TV unit and the equipment. HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected to the HDMI connector using an HDMI compliant (fully wired) cable. •HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard. •If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).•When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal. •Audio settings can be made on the “HDMI in” menu screen. (p. 14-15) Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz (*1): The HDMI logo is displayed on an HDMI-compliant equipment. (*2): Enquire at your local digital equipment retailer shop. •All signals are reformatted before being displayed on the screen. •If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”. •This HDMI connector is “type A”. •Equipment having no digital output terminal may be connected to the input terminal of either “COMPONENT”, “S VIDEO”, or “VIDEO” to receive analog signals. •The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p and 1080i Match the output setting of the digital equipment. •For details of the applicable HDMI signals, see below. Caution •Use with a PC is not assumed. Input signals that can be displayed * Mark: Applicable input signal for Component (Y, PB, PR) and HDMI horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI 525 (480) / 60i 15.73 59.94 * * 525 (480) /60p 31.47 59.94 * * 750 (720) /60p 45.00 59.94 * * 1,125 (1,080) /60i 33.75 59.94 * * •Note Signals other than those shown above may not be displayed properly. •The above signals are reformatted for optimal viewing on your display. •Pic. mode Vivid (default) : Provides enhanced picture contrast and sharpness for viewing in a well-lit room.•Standard : Recommended for normal viewing conditions with subdued room lighting.•Cinema : For watching movies in a darkened room. It provides a soft, film-like picture. FAQs, Technical Information Maintenance First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. •If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent solution and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth, of the same type, until the surface is dry. •Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner; otherwise, the quality of the surface may be adversely affected. Cabinet If the cabinet becomes dirty, wipe it with a soft, dry cloth. •If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth. •Do not allow any detergent to come into direct contact with the surface of the LCD TV. If water droplets get inside the unit, operating problems may result. •Avoid contact with volatile substances such as insect sprays, solvents and thinner; otherwise, the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC. Power cord plug Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.) FAQ Before requesting service or assistance, please follow these simple guides to resolve the ...
Ce manuel est également adapté pour les modèles :TV - TC26LX60 (2.03 mb)
TV - TC26LE60 (2.03 mb)
TV - TC32LE60 (2.03 mb)