Évaluations - 4, GPA: 3.3 ( )

Fabricant : Panasonic Taille : 9.24 mb Nom Fichier : TCL32C5.PDF Langue d'enseignement:

2. AUDIO IN — Shared analog audio connection when using PC or HDMI/ DVI inputs. 3. ANT/CABLE — Input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital Cable TV (QAM) signals. 4. PC IN — For use when connecting a personal computer. 5. DIGITAL AUDIO OUT — Coaxial audio output in Dolby Digital or PCM (pulse-code modulation) format for connecting an external Dolby Digital decoder, amplifier, A/V receiver, or home theater system with Coaxial audio input. 6. VIDEO IN / COMPONENT IN — These include standard A/V connections. These are switched by AV input mode. 7. USB Port — To access JPEG or MP3 files. zzYou need to subscribe to a cable TV service to enjoy viewing their programming. zzYou may need to subscribe to a high-definition (HD) cable service to enjoy HD programming. zzThe connection for high-definition can be done with the use of an HDMI or Component Video cable. Note: zzWhen using a Cable box, external equipment and video cables shown in manual are not supplied with the TV. zzFor additional assistance, visit us at: TV controls/indicators Changes the input modeChooses menu and submenu entriesVolume up/downSelects channels in sequencenottub REWOP Menu navigationsFront of the TV rotacidni rewoP )thgil on :ffo ,der :no ( Remote control sensor within about 23 feet (7 meters) in front of the TV set Note: zzThe TV consumes a small amount of electric energy even when turned off. zzDo not place any objects between the TV remote control sensor and remote control. 4 Installing the remote’s batteries Push! OpenClose zzIncorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. zzDo not mix old and new batteries. zzDo not mix different battery types (such as alkaline and manganese batteries). zzDo not use rechargeable (Ni-Cd) batteries. zzDo not burn or break batteries. Remote control 1. POWER - Turns the TV on and off. 2. LAST - Switches to previously viewed channel or input. 3. STILL - Still picture direct function key. 4. CC - Switches the Closed Caption mode On or Off. 5. INPUT - Select mode “ANT/ Cable in”, ”HDMI 1”, ”HDMI 2”, ”Component”, ”Video”, ”PC” by pressing INPUT button of Remote Control. 6. Volume Up / Down (VOL+ / - ) - Press to decrease or increase the audio volume. 7. MUTE - Turns off/on the sound. 8. FORMAT - To cycle through the aspect modes. 9. MENU - Press to display on- screen menu. 10. PLAY / PAUSE / STOP - Operation of media player. 11. SAP - Selects Secondary Audio Programming . 12. Channel Numbers - Directly tune channels. 13. SLEEP - Accesses the sleep timer. 14. FAVORITE - Accesses the Favorites channel. 15. USB - Viewing from USB. 16. Channel Up / Down (CH V / V) - Press to switch to the last or next channel. 17. EXIT - Exit from the menu screen. 18. INFO - Displays TV status information as well as program details. 19. RETURN - Press to Return to previous menu. 20. COLOR KEY - Red/Green/Blue/Yellow key for various function. First Time Setup First time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” is set to “No”. . Turn the TV On with the POWER button . Configure your viewing mode 1. Select your language and viewing mode (Be sure to select “Home use”) 2. Please confirm your selection (Home Use) before pressing OK button. zzIf you use any other step other than “ Select your viewing mode “ then turn the TV off, or if you used the EXIT button to quit before completing the settings, the next time you turn the TV on, “First time setup” will not be automatically displayed. • The settings up to that point are saved. • You can start “First time setup” from Setup menu of main menu at any time. zzLanguage, ANT/Cable setup, Input labels, and Clock can also be changed in the Settings Menu. . Auto channel setup (ANT/Cable setup) 1. Select the connected Antenna in terminal. Not used: Go to step 4 (Label inputs) Select “Not used” when no wire is connected to the “Antenna/Cable” terminal. zzTypical when a Cable/Satellite box is connected to a TV AV input. zzPrevents accidental tuning to an unavailable signal, when Cable or Satellite box is used. 2. Select “Start”. Skip: Go to step 4 (Label inputs) Start scanning the channels (Available channels are automatically set.) Note: zzThis process may take up to 20 minutes. zzThis step is not needed when a Cable or Satellite box is connected to an AV input. 3. Finished scanning. Completion message is displayed when the Auto program scan is successfully completed. If there is no available channel, return to ANT/ Cable setup. “Not used” will be selected. zzOperation of the EXIT button during “First time setup” Press the button once to display confirmation screen. Press again to close confirmation screen. [EXIT confirmation screen] Yes Exit “First time setup” No Return to the original screen. 4. Give names to the TV’s inputs (Label inp...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :