Évaluations - 1, GPA: 4
(
)
)
|
Facilité d'utilisation
If there are no parameters, then the parameter signal does not need to be sent. End (03h) (02h) command (3 bytes) Notes: • If multiple commands are transmitted, be sure to wait for the response for the first command to come from this unit before sending the next command. • If an incorrect command is sent by mistake, this unit will Command Parameter Control details PON None Power ON POF None Power OFF AVL ** Volume 00 - 63 AMT 0 Audio MUTE OFF 1 Audio MUTE ON IMS None SL1 SL2 SL3 PC1 Input select (toggle) Slot1 input Slot2 input Slot3 input PC input DAM None NORM ZOOM FULL JUST SELF Screen mode select (toggle) NORMAL (4 : 3) ZOOM FULL JUST Panasonic AUTO Start 3-character Colon Parameter(s) (1 - 5 bytes) STX C1 C2 C3 P1 P2 P3 P4: P5 ETX send an “ER401” command back to the computer. With the power off, this display responds to PON command only. Power ON / OFF Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 9) Connecting the plug to the Wall Outlet Press the Power switch on the Plasma Display to turn the set on: Power-On. Power Indicator: Green INPUT MENU ENTER/+/VOL-/ TH-42PWD8 TH-42PWD8 Power Indicator Example: The screen below is displayed for a while after the Plasma Display is turned on. (setting condition is an example.) Remote Control Sensor From the second time on, the screen shown below is displayed for a while (setting condition is an example). English (UK) Deutsch Francais Italiano Espanol ENGLISH (US) Русский OSD Language SetSelect Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green Turn the power to the Plasma Display off by pressing the switch on the unit, when the Plasma Display is on or in standby mode. Note: During operation of the power management function, the power indicator turns orange in the power off state. When the POWER is turned on for the first time, the LANGUAGE selection screen is displayed. From the second time on, language selection can be done from the setup menu. (see page 13) Select the desired language using the or button and press the ACTION ( ) button. PC FULL Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: • TH-37PWD8GK/S, TH-37PHD8GK/S • TH-42PWD8GK/S, TH-42PHD8GK/S Notes: • Selecting is also possible by pressing the INPUT button on the unit. • Input terminal will not be selected if the terminal board is not installed into the SLOT. • Select to match the signals from the source connected to the component/RGB input terminals. (see page 35) • In 2 screen display, the same input mode cannot be selected for the main picture and sub picture. INPUT MENU ENTER/+/VOL-/ INPUT MENU ENTER/ +/VOL-/ TH-42PWD8 INPUT1 INPUT2 PC IN INPUT1 INPUT2 PC ININPUT3 Selecting the On-Screen Menu Language Press to display the SET UP menu. Press to select OSD LANGUAGE. Press to select your preferred language. Selectable languages 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP .......(Japanese) .......(Chinese) Italiano Francais Deutsch English(UK) Espanol ENGLISH(US) .......(Russian)Русский Basic Controls Remote control sensor INPUT MENU ENTER/+/VOL-/ TH-42PWD8 Main Power On / Off Switch Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ......... Red • Power-ON ......Green • DPMS .............Orange (With PC input signal and during operation of PC’s screensaver.) ON OFF ONSURROUND SURROUND button The surround setting switches on and off each time the SURROUND button is pressed. The ben...
Ce manuel est également adapté pour les modèles :TV - TH-37PHD8GK (4.71 mb)
TV - TH-42PHD8GK (4.71 mb)
TV - TH-42PHD8GS (4.71 mb)
TV - TH-37PWD8GK (4.71 mb)