Évaluations - 1, GPA: 3
(
)
)
|
Facilité d'utilisation
Press to set ON / OFF. Press to exit from adjust mode. 39 3:2 PULLDOWN / VIDEO NR COLOR SYSTEM / Panasonic AUTO Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.(“SIGNAL [VIDEO]” menu is displayed.) SET UP for Input Signals Press to select the “COLOR SYSTEM” or “Panasonic AUTO”. Press to select each function. If the image becomes unstable: With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal. Press to select 3:2 PULLDOWN or VIDEO NR. Press to set ON/OFF. Press to exit from adjust mode. 3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to OFF. Notes: When ON, this setting only affects the following signal input: • NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal. • 525i(480i) 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal. VIDEO NR: Automatically reduces unwanted picture noise. Note: VIDEO NR cannot be adjusted while a PC signal is being applied. 1 2 Press ACTION ( ) button Mode Function COLOR SYSTEM Set the color system to match the input signal. If set to “AUTO”, the color system is determined automatically. AUTO PAL SECAM M.NTSC NTSC Panasonic AUTO (4 : 3 ) Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO is selected. If you would like to view 4:3 images in Just format, set to “JUST”. 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP 3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF NORMAL [ VIDEO ] VIDEO NR OFF 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP 3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF NORMAL [ VIDEO ] VIDEO NR OFF SYNC VIDEO NR SIGNAL AUTO H-FREQ. V-FREQ. kHz Hz 33.8 60.0 [ RGB ] 3 : 2 PULLDOWN OFF OFF 3 : 2 PULLDOWN VIDEO NR SIGNAL OFF OFF [ COMPONENT ] 3 : 2 PULLDOWN VIDEO NR SIGNAL OFF OFF H-FREQ. V-FREQ. kHz Hz 33.8 60.0 [ Digital ] Press ACTION ( ) button Note: Panasonic AUTO does not function when TY-FB9BD (BNC Dual Video Terminal Board (option)) is used. 40 SET UP for Input Signals Select SIGNAL from the “SET UP” menu during RGB input signal. Press to adjust. Press to exit from adjust mode. SYNC Setting RGB sync signal Confi rm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal). AUTO: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync. ON G: Uses a synchronized signal on the Video G signal, which is input from the G connec...
Ce manuel est également adapté pour les modèles :TV - TH-37PH9UK (4.23 mb)
TV - TH-42PH9UK (4.23 mb)
TV - TH-42PH9XK (4.23 mb)
TV - TH-50PH9UK (4.23 mb)