Évaluations - 5, GPA: 3.8
(
)
)
|
Par ce dispositif a également d'autres instructions :
TV - KLV-L23M1 (4.2 mb)
TV - KLV-L23M1 (3.89 mb)
TV - KLV-L23M1 (2.34 mb)
Facilité d'utilisation
Clip Installation Adjusting the viewing angle of the TV You can adjust the angle to avoid the reflection of light and get a better view of the TV. • When you adjust the angle, make sure that the cables are not caught between the TV and the stand. If some of the cables get caught, divide them into two groups at the clip and pull them in the opposite direction to free them up. • When adjusting the angle, hold the stand with your hand so that it does not come loose or fall off. Be careful not to catch your fingers between the TV and the stand. 15. Installation First Time Operation Switching On the TV and Tuning the TV Automatically The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) choose the country/region in which you want to operate the TV, 3) search and store all available channels (TV Broadcast), and 4) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change any of these settings at a later date, you can do so by selecting the appropriate option in the “Set Up” menu (see page 28). 1 Connect the TV to the mains (220–240 V AC, 50 Hz). 2 Press the (Power) switch on the TV to switch it on. The first time you switch on the TV, the Language menu appears automatically on the screen (Auto Startup). To perform Auto Startup later, press 0 on the rear panel of the TV. 3 Press / / or on the remote control to select the language, then press OK to confirm your selection. From now on, all the menus will appear in the selected language. Language Select Language English Nederlands Francais Italiano Deutsch Turkce ........Espanol Portugues Polski CeskyMagyar РусскийБьлгарскиSuomi Dansk Svenska Norsk 4 The Country menu appears automatically on the screen. Press or to select the country/region in which you will operate the TV, then press OK to confirm your selection. If the country/region in which you want to use the TV does not appear in the list, select “–” instead of a country/region. Country Select Country – United Kingdom Ireland Nederland Belgie/Belgique Luxembourg France Italia Schweiz/Suisse/Svizzera Deutschland Osterreich 5 The Auto Tuning menu appears automatically on the screen. Press OK to select Yes. Do you want to start automatic tuning ? Yes No (continued) First Time Operation 6 The TV starts searching and storing all available broadcast channels. • This procedure could take some minutes. Please be patient and do not press any buttons, otherwise the auto tuning will not be completed properly. • If no channels are found during the auto tuning process, a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see page 16) and press OK. The auto tuning process will start again. Auto Tuning Programme : System : Channel : Searching... 01 I C23 No channel found. Please connect aerial Confirm 7 When the auto tuning is finished, the Programme Sorting menu appears automatically on the screen. A) If you want to keep the broadcast channels in the tuned order, go to step 8. B) If you want to store the broadcast channels in a different order: 1 Press or to select the programme number with the channel you want to rearrange, then press . 2 Press or to select the new programme number position for your selected channel, then press . The selected channel now moves to its new programme position and the other channels move accordingly. 3 Repeat steps 1 and 2 if you want to change the order of the other channels. Programme Sorting Select Channel 01 02 03 04 05 06 07 08 09 10 11 TVE TVE2 TV3 C33 C27 C58 S02 S06 S08 S12 S14 Exit: MENU Programme Sorting Select new position 01 TVE TVE TVE2 TV3 C33 C27 C58 S02 S06 S08 S12 S14 01 02 03 04 05 06 07 08 09 10 11 Exit: MENU 8 Press MENU to turn off the menu. Your TV is now ready for use. First Time Operation Menu System Introducing and Using the Menu System Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the remote control to operate the menu system. 1 Press MENU to switch the first level menu on. 2 Do the following to operate the menu. • To highlight the desired menu or option, press or . • To enter the selected menu or option, press OK. • To return to the last menu or option, press . • To alter the settings of your selected option, press / / or . • To confirm your selection, press OK. 3 Press MENU to turn off the menu. Menu System Picture Adjustment Select: Set: End:OK MENU Mode : Contrast : Brightness : Colour : Hue : Sharpness : Backlight : NR : Dynamic Picture : Colour Tone : Reset Personal 50 50 25 0 25 5 Auto On Cool Picture Adjustment Select: Set: Back: OK End: MENU Mode : Contrast : Personal Brightness : Colour : 50 Hue : Sharpness : 0 Backlight : NR : 5 Dynamic Picture : Colour Tone : On Reset 50 25 25 Auto Cool Picture Adjustment The “Picture Adjustment” menu allows you to alter the picture adjustments. To do this: , After selecting ...