Évaluations - 6, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
The Network connection values are displayed. English How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 2 in the “How to set up automatically” procedure. 2. Select the IP Settings on network test screen. 3. Set IP Mode to Manual. 4. Press the T button on your remote to go to the first entry field. < ► English 5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network connection screen appears, and network setting is done. < ► English □ Connecting to a Wireless Network To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB port. See the illustration below. For LCD 550 series and above л Wireless IP sharer (Wireless router having DHCP Server) The LAN Port on the Wall ■fit TV Side Panel Samsung Wireless LAN Adapter LAN Cable D I 0 ► English < Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not be played smoothly. N NOTE You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless network. Samsung Wireless LAN Adapter and The USB extension Cable are sold separately and are offered by select retailers and Ecommerce sites. ► English English To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure. If you apply a security system other than the systems listed below, it will not work with the TV. ► • If HIGH PURE THROUGHPUT (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. • If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. < ► English A If your router, modem, or device is not certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter.” Ensure the TV is turned off before you connect the Samsung Wireless LAN Adapter. Connection Methods: You can setup the wireless network connection on five ways. - Auto Setup (Using the Auto Network Search function) - Manual Setup - WPS (PBC) - One Foot Connection - Ad hoc The Samsung Wireless LAN Adapter may not be recognized when using a connection via a USB hub or via a USB extension cable other than the cable supplied. ► English Notice The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference. Method 1 Connect using the USB right angle adapter To connect the Samsung Wireless LAN Adapter using the USB right angle adapter, follow these steps: 1. Connect the USB right angle adapter to the Samsung Wireless LAN Adapter. 2. Connect the other end of the right angle adapter to the USB (HDD) port. ► English < Method 2 Connect via an extension cable To reconnect the Samsung Wireless LAN Adapter using the extension cable, follow these steps: 1. Connect the extension cable to the USB (HDD) port. 2. Connect the extension cable and Samsung Wireless LAN Adapter. 3. Attach the Samsung Wireless LAN Adapter to the back of the TV near the top, using double-sided adhesive tape. N The Samsung Wireless LAN Adapter should be installed in an interference-free area in order to avoid interference between the adapter and tuner. ► English A ■ Network Setup (Auto) Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless networ...
Ce manuel est également adapté pour les modèles :TV - LA32D450G1W (6.3 mb)
TV - LA32D550K7W (6.3 mb)
TV - LA40D550K7W (6.3 mb)
TV - LA46D550K7W (6.3 mb)