Évaluations - 1, GPA: 4
(
)
)
|
Photos et spécifications LG 21FU2RG |
Facilité d'utilisation
Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this infor- mation to your dealer when you require service. Model number : Serial number : P/NO : MFL32369929 (MC059C, 124Y TX) Contents Installation.........................................................2 Connection of external equipment..................3 Location and function of controls...................4 Basic operation.................................................7 On screen menus..............................................7 Setting up TV stations......................................8 Picture adjustment..........................................11 Sound adjustment...........................................12 Time setting.....................................................13 Other functions...............................................14 Troubleshooting check list............................15 Installation Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Warning To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not place anything containing liquid on top of the set, this may cause a fire or could give an electric shock. Service Never remove the back cover of the set as this can expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer. Aerial Connect the aerial cable to the socket marked +75 . on the back cover. For the best reception an outdoor aerial should be used. Location Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. Connection of external equipment You can connect additional equipment, such as VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. Aerial socket 1. Connect the RF out socket of the VCR to the aerial socket on the back of the set. 2. Connect the aerial cable to the RF aerial in socket of the VCR. 3. Store the VCR channel on the programme number 0 using the ‘Manual programme tuning’ section. 4. Select the programme number where the VCR channel is stored. 5. Press the PLAY button on the VCR. Audio/Video in/out sockets (option) 1. Connect the audio/video out sockets of the VCR to audio/video in sockets of the set and in sockets of the VCR to out sockets of the set. 2. If the VCR is connected to the AV sockets on the set, press the TV/AV button to select AV (or AV1 ), AV 2 . 3. Press the PLAY button on the VCR. The VCR playback picture appears on the screen. You can also record programmes received by the TV on video tape via audio/video out sockets. Note : If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO socket of the set. Euro scart socket (option) 1. Connect the Euro scart socket of the VCR to the Euro scart socket of the set. 2. Press the PLAY button on the VCR. If your VCR outputs a switching voltage when connected to Euro scart socket, the set will switch to AV (or AV1 ) mode automatically. But if you want to keep on watching TV mode, press the D DD / E EE or NUMBER buttons. Otherwise press the TV/AV button on the remote control handset to select AV (or AV1 ). The VCR playback picture appears on the screen. You can also record programmes received by the TV on video tape. Note : Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo CD unit, etc. S-video / Audio in sockets (S-AV) (option) When connecting the S-video socket of the VCR to the S-VIDEO socket of the set, the picture quality will be further improved. 1. Connect the S-video socket of the VCR to the S-VIDEO socket of the set. 2. Connect the audio cable from the VCR to the AUDIO sockets of the set. 3. Select AV3 by pressing the TV/AV button repeatedly. 4. Press the PLAY button on the VCR. The VCR playback picture appears on the screen. Note : If both S-VIDEO and VIDEO sockets have been connected to the VCR simultaneously, only the S-VIDEO can be received. Component in sockets (option) 1. Connect the COMPONENT video output sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the DVD player to the COMPONENT INPUT sockets (Y PB PR) on the set. 2. Connect the audio cable from the DVD player to AUDIO IN sockets of AV (or AV1). 3. Press the TV/AV button to select COMPONENT . 4. Press the PLAY button on the DVD player. The COMPONENT playback picture appears on the screen. Headphone socket (option) Only models which have a headphone socket can perform this function. Insert th...