Évaluations - 4, GPA: 4.8
(
)
)
|
Facilité d'utilisation
Do not over tighten. CAUTION yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten. (Only 32LV25**, 32/42LV34**, 32/37/40/42/47LV35**, 32/37/42/47LV45**, 32/42/47/55LW45**, 32/37/42/47LV36**) (Only 19/22/26LV25**, 22/26LV55**) 1 Lay the TV with the screen side down on a flat surface. 1 Lay the TV with the screen side down on a flat surface. CAUTION yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage. CAUTION yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 Assemble the parts of the Stand Body with the Stand Base of the TV. 2 Assemble the parts of the Stand Body with the Stand Base of the TV. Only 32LV25** Except for 32LV25** Stand BodyStand Base Stand Body Stand Body (M4x6) Stand Base Stand Base 3 Secure the TV and the stand with the 2 screws. 3 Secure the TV and the stand with the 4 screws. (M4x16) CAUTION yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten. CAUTION yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten. (Only 42/47LW54**) 4 Secure the TV and the stand with the 4 screws. 1 Lay the TV with the screen side down on a flat surface. CAUTION yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 Assemble the parts of the Stand Body with the Stand Base of the TV. CAUTION yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten. Stand Body Stand Base 3 Assemble the TV as shown. (Only 26/32LK33**, 32/37/42LK43**, 32/42/47LK53**, 32/37/42LK45**, 32/42LK55**, 47LK95**, 32/37/42LK46**) 1 Push the supplied Protection cover into the opening at the bottom of the TV until clicking sound. Not using the Desk Type stand yyImage shown may differ from your TV. (Only 42/50PT25**, 50/60PV25**, 42/50PT35**, 50PV35**, 50/60PZ25**, 42/50PW45**, 50/60PZ55**, 42/50PT45**) yyPush the supplied Protection cover into the opening at the bottom of the TV until it locks in place. yyAttach the Protection cover tape. - This will protect the opening from accumulating dust and dirt. - When installing the wall mounting bracket, use the Protection cover. Protection cover Protection cover tape (Only 22LK33**) 1 Lay the TV with the screen side down on a flat surface. Protection cover 2 Remove the 2 screws and pull the stand away from the TV. 3 Push the supplied protection cover into the opening at the bottom of the TV until it locks in place. This will protect the opening from accumulating dust and dirt. Protection cover Securing the TV to a table yyImage shown may differ from your TV. (Only 26/32LK33**, 32/37/42LK43**, 32/37/42LK45**, 32/42LK53**, 32/42LK55**, 32LV25**, 32/37LV35**, 32LW45**, 32/37LV45**, 32LV34**, 32/37/42LK46**, 32/37LV36**) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand. Mounting on a table yyImage shown may differ from your TV. 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm 2 Connect the Power cord to a wall outlet. WARNING yyTo prevent the TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. CAUTION yyDo not place the TV near or on sources of heat, as this may result in fire or other damage. NOTE yySwivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.(Except for 22LK33**, 19/22/26LV25**, 22/26LV55**, 19/22LV23**) Securing the TV to a wall yyImage shown may differ from your TV. Using the Kensington security system (This feature is not available for all models.) yyImage shown may differ from your TV. The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit Connect the Kensington security system cable between the TV and a table. 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. Mounting on a wall Attach a wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. CAUTION yyMake sure that children do not cli...
Ce manuel est également adapté pour les modèles :TV - 19LV2300 (11.26 mb)
TV - 19LV2500 (11.26 mb)
TV - 22LV5510 (11.26 mb)
TV - 26LK330 (11.26 mb)