Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
>>To adjust colour temperature. You can also adjust Colour Temperature in the PICTURE menu. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00 : Lock off 01 : Lock on Transmission [x][u][ ][Set ID][ ][Data][Cr] Ack [m][ ][Set ID][ ][OK/NG][Data][x] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.114. * If you are not using the remote control, use this mode. When main power is on/off, external control lock is released. * In the standby mode, if key lock is on, TV will not turn on by power on key of IR & Local Key. Ack [u][ ][Set ID][ ][OK/NG][Data][x] 20. Tune Command (Command: m a) 17. ISM Method (Command: j p) (Only Plasma TV) >>To control the ISM method. You can also adjust ISM Method in OPTION menu. >>Select channel to following physical number. Transmission [j][p][ ][Set ID][ ][Data][Cr] Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] Data00 : High channel data Data01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No. 0 -> Don’t care Data02 : 0x00 : Analogue Main 0x10 : DTV Main 0x20 : Radio Channel data range Analogue - Min: 00 to Max: 63 (0 to 99) Digital - Min: 00 to Max: 3E7 (0 to 999) (Except For Sweden, Finland, Norway, Denmark, Ireland) Digital - Min: 00 to Max: 270F (0 to 9999) (Only Sweden, Finland, Norway, Denmark, Ireland) Data 02: Orbiter 04: White wash 08: Normal 20: Colour Wash Ack [p][ ][Set ID][ ][OK/NG][Data][x] 18. Energy Saving (Command: j q) >>To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu. Transmission [j][q][ ][Set ID][ ][Data][Cr] Power Saving Function Level Description 7 6 5 4 3 2 1 0 0 0 0 0 Low Power 0 0 0 0 Off 0 0 0 0 Low Power 0 0 0 1 Minimum 0 0 0 0 Low Power 0 0 1 0 Medium 0 0 0 0 Low Power 0 0 1 1 Maximum 0 0 0 0 Low Power 0 1 0 1 Screen Off 0 0 0 0 Low Power 0 1 0 0 Intelligent Sensor (Only Plasma TV) 0 0 0 0 Low Power 0 1 0 0 Auto (Only LCD TV/LED LCD TV - Depending on models) Ack [a][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 to Max: 7DH 21. Programme Add/Skip(Command: m b) >>To set skip status for the current Programme. Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00 : Skip 01 : Add Ack [b][ ][Set ID][ ][OK/NG][Data][x] 22. Key(Command: m c) >>To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Ack [q][ ][Set ID][ ][OK/NG][Data][x] Data Key code - Refer to page 107. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 19. Auto Configure(Command: j u) >>To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. 23. Control Back Light (Command: m g) (Only LCD TV/LED LCD TV) Transmission [j][u][ ][Set ID][ ][Data][Cr] >>To Control the back light. Data 01: To set Transmission [m][g][ ][Set ID][ ][Data][Cr] Ack [u][ ][Set ID][ ][OK/NG][Data][x] Data : data Min: 00 to Max: 64 Ack [g][ ][Set ID][ ][OK/NG][Data][x] 25. 3D(Command: x t) (only 3D models) 24. Input select (Command: x b) (Main Picture Input) >>To change 3D mode for TV. >>To select input source for main picture. Transmission [x][t][ ][Set ID][ ][Data01][ ][Data02] [ ][Data03][ ][Data04][Cr] Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure Data01 00 : 3D On 01 : 3D Off 02 : 3D to 2D 03 : 2D to 3D Data02 00 : Top and Bottom 01 : Side by Side 02 : Check Board 03 : Frame Sequential Data03 00 : Right to Left 01 : Left to Right Data04 3D Effect(3D Depth) : Min : 00 ~ Max : 14 (*transmit by Hexadecimal code) *If data1 is 00(3D On), data4 has no meaning. *If data1 is 01(3D off) or 02(3D to 2D), data2, data3 and data4 have no meaning. *If data1 is 03(2D to 3D), data2 and data3 have no meaning. Data Structure MSB LSB 0 0 0 0 0 0 0 0 External Input Input Number External Input Data 0 0 0 0 DTV 0 0 0 1 Analogue 0 0 1 0 AV 0 1 0 0 Component 0 1 1 0 RGB 0 1 1 1 HDMI 1 0 0 0 1 0 0 1 1 0 1 0 Data 1 Data 2 Data 3 Data 4 00 O O X 01 X X X 02 X X X 03 X X O Input Number Data 0 0 0 0 Input1 0 0 0 1 Input2 0 0 1 0 Input3 0 0 1 1 Input4 X : don’t care Ack [t][ ][OK][Data01][Data02][Data03][Data04][x] [t][ ][NG][Data01][x] Ack [b][ ][Set ID][ ][OK/NG][Data][x] 26 . Extended 3D(Command: x v) (only 3D models) >>To change 3D option for TV. Transmission [x][v][ ][Set ID][ ][Data01][ ] [Data02][Cr] * Real data mapping 00 : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE : Step 254 FF : Step 255 Data01 : 3D option 00 : 3D Picture Correction 01 : 3D Depth(Only 2D to 3D) 02 : 3D Viewpoint 03 : 3D Picture Size(Only Plasma TV) 04 : 3D Picture Balance (Only Plasma TV) 05 : 3D Optimization(Only Active type (LCD TV)) Data02 It has own range for each 3D option determined by Data01. 1) When Data 01 is 00 00 : Right to Left 01 : Left to Right 2) When Data 01 is 01, 02 Data Min: 0 ~ Max: 14 3) When Data 01 is 03 00 : Just Scan 01 : 16:9 4) When Data 01 is 04 00 : Off 01 : On 5) When Data 01 is 05 Data Min: 0 ~ Max: 02 * Refer to ‘Real data mapping’. Ack [v][ ][OK][Data01][Data02][x][v][...
Ce manuel est également adapté pour les modèles :TV - 22LV2300 (10.16 mb)
TV - 32LK455 (10.16 mb)
TV - 32LK530 (10.16 mb)
TV - 32LV4500 (10.16 mb)