Évaluations - 2, GPA: 4.5 ( )

Fabricant : Toshiba Taille : 5.56 mb Nom Fichier : Langue d'enseignement:

Note: A video preview of the currently highlighted channel is provided to assist you in adding/deleting channels. To remove encrypted channels from the channel memory: If an encrypted channel is accidentally added to the channel list by programming channels, you can remove the unwanted encrypted (non-viewable) channel while you are channel surfing. When you tune into an encrypted channel, the following message will appear. Press while the message is on the screen to remove the unnecessary channel from the channel list. Labeling channels A list of common channel labels (logos) for various channels (ABC, CBS, etc.) will be programmed into the TV. You will be able to view and assign these logos from the Channel Labeling window. If the desired channel label is not provided in the list, you will be able to manually enter/edit labels using the software keyboard. To assign channel labels: 1 Press and open the Preferences menu. 2 Highlight Channel Labeling and press . The Channel Labeling window opens. 3 Press or to select the channel you want to label. 4 Press pqtu to highlight the desired channel label and press . 5 Repeat steps 3 and 4 for other channels. 6 To save your settings, highlight Done and press . The maximum number of labels that can be stored is 128. To remove channel labels: 1 Open the Channel Labeling window. 2 Press or to select the channel for which you want to remove the label. 3 Press pqtu to highlight No Label and press . 4 Repeat steps 2 and 3 for other channels. 5 To save your settings, highlight Done and press . If the desired channel label is not available from the list of presets, you can create a custom label. (continued) Chapter 5: Setting up your TV To create and assign a custom label: 1 Open the Channel Labeling window. 2 Press or to select a channel you want to label. 3 Press pqu to highlight Custom and press . The software keyboard will appear. 4 Repeatedly press the corresponding key on the remote control to highlight the desired character on the on-screen software keyboard. 5 The highlighted character is entered after you either press a different key, press u key, or after a two-second pause. 6 Repeat steps 4 and 5 until you have entered all desired text. 7 When finished, press . 8 New labels will be added to the list in alphabetical order and marked with an icon to indicate that they are custom. Highlight the new custom label and press to assign. Assigned channel labels will be displayed in the banner, Channel Add/Delete, Channels Block, and Channel BrowserTM. To delete the custom label: 1. Open the Channel Labeling window. 2. Highlight the label to be deleted and press . 3. Highlight Yes from the deletion confirmation window and press . 4 Highlight Done and press to save changes, and go back to the Channel Labeling window. Setting the HDMI™ audio mode To set the HDMI audio mode: 1 Press and open the Audio menu. 2 Highlight Audio Setup and press . 3 Press p or q to select HDMI 1 Audio and then press t or u to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See “Connecting an HDMI or DVI device to the HDMI input” (. page 15). Mode Description When viewing the HDMI 1 input, if digital audio from the HDMI input is Auto available, it will be output. If not, the TV will automatically detect and output analog audio from the PC Audio input. When viewing the HDMI 1 input, Digital digital audio from the HDMI input will be output. When viewing the HDMI 1 input, Analog analog audio from the PC Audio input will be output. 4 To save your settings, highlight Done and press . Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 7 on page 11 and “Setting the PC Audio” on page 43.) Chapter 5: Setting up your TV Viewing the digital signal meter You can view the digital signal meter in the ANT/CABLE digital TV input source only. To view the digital signal meter: 1 Press and open the Setup menu. 2 Highlight Installation and press . 3 A new set of Installation menu icons will appear. Open the Terrestrial menu, highlight Signal Meter, and press . 4 Press pqtu to select the antenna input and digital channel whose signal you want to check. Note: • The physical digital channel number listed in the Signal Meter screen may not correspond to a virtual TV channel number. Contact your local broadcasters to obtain the RF channel numbers for your local digital stations. • The signal strength does not change between virtual channels on the same physical channel. To close the screen and return to the Terrestrial menu: Highlight Done and press . To return to normal viewing: Press . Setting the time zone The Time Zone setup will allow you to specify the correct time zone for your region. This...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :