Évaluations - 1, GPA: 3
(
)
)
|
Facilité d'utilisation
page 22). To program the TV remote control to operate other devices, see Chapter 3. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. * Chapter 2: Connecting your TV Chapter 2: Connecting your TV Connecting a camcorder You will need: • standard A/V cables . For better picture performance, if your camcorder has S-video, connect an S-video cable (plus the audio cables) to VIDEO 1 on the TV back instead of the VIDEO 2 on the TV side panel. Camcorder VIDEO AUDIO OUT L R VIDEO 2 inputs on TV side panel To view the camcorder video: Select the VIDEO 2 video input source on the TV.* * To select the video input source, press INPUT on the remote control (.. page 22). To program the TV remote control to operate other devices, see Chapter 3. Chapter 2: Connecting your TV Chapter 2: Connecting your TV Connecting an HDMI™ or DVI device to the HDMI input The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D–compliant[1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz) and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 58. Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz Note: To connect a PC to the HDMI input, see page 20. To connect an HDMI device, you will need: • one HDMI cable (type A connector) per HDMI device . For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ). . To display an 1080i/60Hz signal format, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly. . HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration). . See “Setting the HDMI™ audio mode” (.. page 33). To view the HDMI device video: Select the HDMI 1, HDMI 2 or HDMI 3 video input source on the TV.* * To select the video input source, press INPUT on the remote control (.. page 22). To program the TV remote control to operate other devices, see Chapter 3. To connect a DVI device, you will need: • one HDMI-to-DVI adapter cable (HDMI type A connector) per DVI device . For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m). • one pair of standard analog audio cables per DVI device . An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration). . See “S...
Ce manuel est également adapté pour les modèles :TV - 40RV525U (5.24 mb)
TV - 46RV525U (5.24 mb)
TV - 40RV525U (5.24 mb)
TV - 40RV52U (5.24 mb)