Évaluations - 1, GPA: 4
(
)
)
|
Facilité d'utilisation
. Contact your local broadcasters to obtain the RF channel numbers for your local digital stations. • The signal strength does not change between virtual channels on the same physical channel. To close the screen and return to the Terrestrial menu: Highlight Done and press . To return to normal viewing: Press . Setting the time zone The Time Zone setup will allow you to specify the correct time zone for your region. This feature will allow the TV status information to show the correct time zone information (. page 49). To set the time zone: 1. From the Setup menu, highlight Installation and press . A new set of Installation menu icons will appear. 2. Highlight Time Zone, and press . 3. Press • or • to select the region, highlight Done, and then press . After the time zone has been set, you will be asked to set the current Daylight Saving Time status. To set the Daylight Saving Time status: 1. Press • or • to select Yes or No, Highlight Done, and then press . Viewing the system status To view the system status: and open the Setup menu. 1. Press 2. Highlight Installation and press . 3. Anew set of Installation menu icons will appear. Open the System Status menu, highlight System Information, and press . 4. Press t• to scroll through the menu bar to select the Factory Defaults or Support Information and view the related information. To close the screen and return to the Installation menu: Highlight Done and press . To return to normal viewing: Press . Reset Factory Defaults To reset all settings and channels to their factory default values: and open the Setup menu. 1. Press 2. Highlight Installation and press . A new set of Installation menu icons will appear. 3. Open the System Status menu, highlight System Information, and press . 4. Press t• to scroll through the menu bar to select Factory Defaults. 5. Highlight Yes and press . 6. (If PIN code has been set, enter your PIN code. Press • or • to select Done and press .)A warning message will appear, select Yes and press , the TV will turn off automatically after a few seconds. After the TV turns off, unplug the TV power cord and then plug it in again to complete the reset process. To cancel the reset: Select No and press in Step 5 above. Chapter 6: Using the TV’s features Selecting the video input source to view To select the video input source to view: on the remote control or TV control panel. 1. Press 2. And then either: a) Press 0-6, or b) Repeatedly press p• on the remote control and then press to change the input; or c) Repeatedly press on the remote control or TV control panel to change the input. The current signal source displays in the top right corner of the Input Selection screen. 63 Note: •You can label the video input sources according to the specific devices you have connected to the TV (. “Labeling the video input sources” at right). •Sources can be “hidden” (. “Labeling the video input sources” at right). •“No video signal” will appear randomly on the screen if no signal is received in video input mode. •If CEC device is connected to an HDMI input, the REGZA-LINK® icon will appear. If a REGZA-LINK® device with HDMI switching capability (e.g. Audio Receiver) is connected to the HDMI input: Press on the remote or TV control panel repeatedly to highlight HDMI 1, HDMI 2, or HDMI 3. If the connected CEC device has any connected devices, a separate device selection popup window will appear. Press repeatedly to highlight the desired input source, and then press . Note: •When selecting REGZA-LINK® input sources from the popup window using , some REGZA-LINK® devices may automatically turn on. •When selecting input sources using pq, you will have to press to actually select a particular device from the popup window. Labeling the video input sources You can label each video input source according to the type of device you connected to each source, from the following preset list of labels: • – – (default label) • Audio Receiver • Cable • Compact Disc • DTV • DVD • Game Console • HDMI Switch (HDMI inputs only) • Laser Disc • Satellite/DSS • VCR • Video Recorder • Hide (to hide an unused input in the Input Selection screen and in the Channel Browser™ Inputs list) Note: If you select PC in the Input Selection screen, you can choose only “– –”, “Game Console”, or “Hide” as the label. To label the video input sources: and open the Preferences menu. 1. Press 2. Highlight Input Labeling and press . 3. Press • or • to highlight the video source you want to label. VideoAudoReceveCabeCompacDscDTV 4. Press • or • to select the desired label for that input source. If a particular input is not used, you can select Hide as the label, which will cause that input to be “grayed out” in the Input Selection screen and skipped over when you press on the remote control. (continued) Chapter 6: Using the TV’s features 5. To save the new input labels, highlight Done and press . To revert to the factory default labels, highlight Reset and press . Input labeling example: The scre...
Ce manuel est également adapté pour les modèles :TV - 65HT2U (5.63 mb)