Évaluations - 2, GPA: 4.5 ( )

Fabricant : Toshiba Taille : 6.1 mb Nom Fichier : Langue d'enseignement:

Mode Description Both analog and digital channels can Standard be tuned normally Digital channels will have priority when manually entering a channel number Auto using the Channel Number (0-9) on the (default) remote control, analog channels can still be tuned by / , if available Digital Only digital channels can be tuned To set the Channel Tuning Mode: 1. From the Setup menu, highlight Installation and press . A new set of Installation menu icons will appear. 2. Open the Terrestrial menu, highlight Channel Tuning Mode, and then press u to select your desired mode. Note: •The Channel Options windows as well as the Channel Browser ANT/CABLE list will be updated automatically when you change the mode. Also, the History List will be cleared, but the Favorites List will be saved. •Even if the Channel Tuning Mode is set to Digital, analog channel 3 will still be the default channel to prevent the initial case where no digital channels have been found in prior channel scans. (Channel Options will not have anything listed until a scan is done.) Tuning to the next programmed channel To tune to the next programmed channel: Press or on the remote control or TV control panel. Note: This feature will not work unless you program channels into the TV’s channel memory (. page 26). Tuning to a specific channel (programmed or unprogrammed) Tuning analog channels: Press the Channel Number (0–9) on the remote control. For example, to select channel 125, press 1, 2, 5, then . Tuning digital channels: Press the Channel Number (0–9) on the remote control, followed by the dash ( ) button and then the sub-channel number. For example, to select digital channel 125-1, press 1, 2, 5, –, 1, then . Note: If a digital channel is not programmed— either through the automatic channel scan (. page 26) or the Channel add function (. page 27)—you will have to tune the RF channel usingthe Channel Number and dash ( ) on the remote control. Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1. Select the first channel you want to view. 2. Select a second channel using the Channel Number buttons (and the dash ( ) button if selecting a digital channel). 3. Press on the remote control. The previous channel will display. Each time you press , the TV will switch back and forth between the last two channels that were tuned. Note: If you press from a non-antenna input, the TV will return to the last-viewed input. (continued) Chapter 6: Using the TV’s features Switching between two channels using SurfLock™ The SurfLock™ feature temporarily “memorizes” one channel to the button, so you can return to that channel quickly from any other channel by pressing . To memorize a channel to the button: 1. Tune the TV to the channel you want to program into the button. 2. Press and hold for about 2 seconds until the message “Memorized” appears on-screen. The chann...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :