Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
When the POP window is open, the AUDIO OUT jacks output the sound of the active window (main or POP). For additional information, see “Notes about recording” on page 73. Note: The VI DEO/AUDIO OUT jacks output the signals from the ANT 1, ANT 2, VIDEO 1, VIDEO 2, or VIDEO 3 jacks when the appropriate input mode is selected. • To use the TV Guide On Screen recording features: Note: If you connect your devices according to the illustration above, you will record from the TV Guide On Screen system to the VCR labeled “VCR2.” 1. Connect the G-LINK cable according to the instructions on page 25. 2. Make sure the VCR2 is connected to the A/V OUT jacks on the TV (see illustration). 3. Set the VCR to the appropriate line input (refer to your VCR owner’s manual for details), and then turn OFF the VCR. 4. See Chapter 5 for details on setting up the TV Guide On Screen system. 5. See Chapter 7 for details on using the TV Guide On Screen system. 18 18 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. HM94(E)012-25(2B-Cnct) 18 8/31/04, 12:52 PM (E) 46/52/62HM94 Chapter 2: Connecting your TV Connecting an HDMI™ or a DVI device to the HDMI input The HDMI[1] input on your TV receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI[2] device. This input is designed to accept HDCP[3] program material in digital form from EIA/CEA-861/861B–compliant[4] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). The HDMI input is designed for best performance with 720p and 1080i high-definition video signals, but will also accept and display 480i and 480p signals. NOTE: NEVER CONNECT THIS TV TO A PERSONAL COMPUTER (PC). THIS TV IS NOT INTENDED FOR USE WITH A PC. [1] HDMI = High-Definition Multimedia Interface. [2] DVI = Digital Video Interface. [3] HDCP = High-bandwidth Digital Content Protection. [4] EIA/CEA-861/861B compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV. NOTE: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: •When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device. •When turning off your electronic components, turn off To connect an HDMI device, you will need: • one HDMI cable (type A connector) For proper operation, it is recommended that you use as short an HDMI cable as possible. You should not encounter difficulty if you use an HDMI cable shorter than 16.4 ft (5m). HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration below). Some CDVs (video CDs) may not output digital audio signa...
Ce manuel est également adapté pour les modèles :TV - 46HM94 (4.13 mb)
TV - 62HM94 (4.13 mb)
TV - 46HM94 (4.13 mb)
TV - 52HM94 (4.13 mb)