Log:
Évaluations - 2, GPA: 4.5 ( )

Instructions Toshiba, Modèle 65HC85

Fabricant : Toshiba
Taille : 3.07 mb
Nom Fichier :
Langue d'enseignement:
Aller à la télécharger



Facilité d'utilisation


Because this is an evolving technology, it is possible that some devices may not operate properly with the monitor. To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: •When turning on your electronic components, turn on the monitor first, and then the HDMI or DVI device. •When turning off your electronic components, turn The HDMI[1] input on your monitor receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI[2] device. This input is designed to accept HDCP[3] program material in digital form from EIA/CEA-861/861B– compliant[4] consumer electronic devices (such as a set- top box or DVD player with HDMI or DVI output). The HDMI input is designed for best performance with 1080i high-definition video signals, but will also accept and display 480i, 480p, and 720p signals. NOTE: NEVER CONNECT THIS MONITOR TO A PERSONAL COMPUTER (PC). THIS MONITOR IS NOT INTENDED FOR USE WITH A PC. Index AppendixOperating yourMonitor Setting upyour Monitor Using theremote control Connectingyour Monitor Introduction Monitor HDMI device VIDEO AUDIO L R IN OUT HDMI OUT OUT 1 IR OUT 2 To connect an HDMI device, you will need: • one HDMI cable (type A connector) For proper operation, it is recommended that you use a short HDMI cable. You should not encounter difficulty if you use an HDMI cable shorter than 16.4 ft (5m). HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration below). Some CDVs (video CDs) may not output digital audio signals. In that case, you may hear sound by connecting analog audio cables. However, if you connect analog audio cables with this connection, the HDMI terminal on the monitor will not receive the HDMI digital audio signal and you will hear analog audio only. off the HDMI or DVI device first, and then the monitor. OUT 1 IR OUT 2 VIDEO AUDIO L R IN OUT DVI OUT To connect a DVI device, you will need: • one HDMI-to-DVI adapter cable (HDMI type A connector) For proper operation, the length of the HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m). • one pair of standard analog audio cables An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration below). Monitor DVI device HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. 15 #01E_08-17_51HC85 15 05.4.28, 6:16 PM Black (E) 51HC85, 57HC85, 65HC85 Controlling infrared remote-controlled devices through the monitor (IR pass-through) Connectingyour Monitor You can use the monitor’s IR OUT terminal (infrared pass-through) to remotely operate (through the monitor) many infrared remote- c...

Ce manuel est également adapté pour les modèles :
TV - 51HC85 (3.07 mb)
TV - 57HC85 (3.07 mb)
TV - 51HC85 (3.07 mb)
TV - 57HC85 (3.07 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories