Évaluations - 5, GPA: 3.8
(
)
)
|
Facilité d'utilisation
Connecting Using the Setting up Using the TV’s Introduction Appendix Index your TV Remote Control your TV Features Connecting two VCRs This connection allows you to record (dub/edit) from “VCR 1” to “VCR 2” (as illustrated below) while watching the videotape. You also can record from one TV channel while watching another channel. You will need: • two coaxial cables • two sets of standard A/V cables From Cable, Cable Box, or Antenna Note: • Do not connect the same VCR to the output and input connections on the TV at the same time. (See the illustration at left, which shows VCR1 connected to VIDEO-1IN on the TV, and VCR2 connected to A/V OUT on the TV.) • If your VCR has S-video, you can use an S-video cable (plus the standard audio cables) instead of a standard video cable for better picture quality. Do not connect both a standard video cable and an S-video cable to VIDEO-1 (or VIDEO-3) at the same time, or the picture performance will be unacceptable. • To dub or edit, VCR 2 must select Line IN, and the TV must select VIDEO-1. • When recording to VCR 2 , set AUDIO OUT to FIXED. With AUDIO OUT set to FIXED, the TV’s volume setting will not affect the sound level being recorded. See “Selecting fixed/variable AUDIO OUT” on page 39. * The AUDIO OUT connections can output either FIXED or VARIABLE audio. See “Selecting fixed/variable AUDIO OUT” on page 39. 11 Index AppendixUsing the TV’sSetting up Introduction Features your TV Connecting a camcorder This connection allows you to watch videos recorded on a camcorder. You will need: • one set of standard A/V cables (see notes at right) Note: • For better picture quality, if your camcorder has S-video, you can use an S-video cable (plus the standard audio cables) instead of a standard video cable. • Do not connect both a standard video cable and an S-video cable at the same time, or the picture performance will be unacceptable. Connectingyour TV Using theRemote Control DEMO MENU TV/VIDEO VO L UME CHANNEL VIDEO-3 IN VIDEOS-VIDEO L/MONO-AUDIO-R VIDEO AUDIO OUT L R Camcorder TV front panel Connecting an audio system This connection allows you to use an audio amplifier to adjust the audio level. This connection also allows you to use external speakers. To control the audio, turn on the TV and the stereo amplifier, and turn off the built-in speakers. (See“Turning off the built-in speakers” on page 39.) You will need: • one coaxial cable • one pair of standard audio cables From Cable, Cable Box, or Antenna LINE IN L R ANT( 75 ) OUTIN S-VIDEO VIDEO VIDEO 1 VIDEO 2 L/ MONO AUDIO R DVD IN PR PB Y COLOR STREAM INPUT L AUDIO R L/ MONO AUDIO R VIDEO VAR/FIX Amplifier TV Note: • When using an external audio amplifier, if you set AUDIO OUT to VARIABLE, the volume of both the TV and amplifier must be set above 0 (zero) or you will not hear any sound. See “Selecting fixed/variable AUDIO OUT” on page 39. • If you set AUDIO OUT to VARIABLE, the TV’s volume controls will adjust the volume. If you set AUDIO OUT to FIXED, you must use the amplifier’s volume controls to adjust the volume. See “Selecting fixed/variable AUDIO OUT” on page 39. 12 Using the remote control Preparing the remote control for use Your TV remote control can operate your TV and most cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box), even if they are different brands. If you have a Toshiba device: Your TV remote control is preprogrammed to operate most Toshiba devices. See pages 14 and 17. If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate: You can program the TV remote control so it will operate the other device. See pages 15–16. Installing the remote control batteries Caution: 1 Remove the battery cover from the back of the remote control. • Dispose of batteries in a designated disposal area. Do not throw batteries into a fire. • Do not mix battery types or combine used batteries with new ones. Squeeze tab • Remove dead batteries immediately to and lift cover. prevent battery acid from leaking into the battery compartment. • If you do not intend to use the remote control for a long time, remove the batteries. 2 Install two “AA” size batteries, making sure to match the + and – signs on the batteries to the signs on the battery compartment. 3 Reinsert the battery cover in the remote control until the tab snaps. Connecting Using the Setting up Using the TV’s Introduction Appendix Index your TV Remote Control your TV Features 13 Index AppendixUsing the TV’sSetting upUsing theConnectingIntroductionFeatures your TV Remote Control your TV DEMO MENU CHANNEL VIDEO-3 IN VIDEOS-VIDEO L/MONO-AUDIO-R TV Front VIDEO-3 A/V IN [21] (with optional S-video) POWER MENU [18] VOLUME st CHANNEL st [20] TV/VIDEODEMO Remote sensor x•zy Location of controls on TV and remote control For details on the use of each control, refer to pages in brackets. TV front panel [40] [21] Power indicator Remote control TV/VIDEO [21] } } POWER RECALL [...
Ce manuel est également adapté pour les modèles :TV - 36AF43 (3.09 mb)
TV - 32AF43 (3.09 mb)
TV - 36AF43 (3.09 mb)