|
Facilité d'utilisation
Follow your local ordinances and regulations for disposal. Handling and cleaning the screen surface/cabinet of the TV set Be sure to unplug the mains lead connected to the TV set from mains socket before cleaning. To avoid material degradation or screen coating degradation, observe the following precautions. • To remove dust from the screen surface/cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution. • Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material. • When adjusting the angle of the TV set, move it slowly so as to prevent the TV set from moving or slipping off from its table stand Optional Equipment Keep optional components or any equipment emitting electromagnetic radiation away from the TV set. Otherwise picture distortion and/or noisy sound may occur. GB 3 GB Additional Information Specifications Display Unit Power Requirements: 220–240 V AC, 50 Hz Screen Size: KDL-40xxxxx: 40 inches KDL-37xxxxx: 37 inches KDL-32xxxxx: 32 inches KDL-26xxxxx: 26 inches Display Resolution: 1,366 dots (horizontal) . 768 lines (vertical) Power Consumption: KDL-40xxxxx: 165 W or less KDL-37xxxxx: 150 W or less KDL-32xxxxx: 130 W or less KDL-26xxxxx: 90 W or less Standby Power Consumption*: 1,6 W or less * Specified standby power is reached after the TV finishes necessary internal processes. Dimensions (w . h . d): KDL-40xxxxx: Approx: 982 x 696 x 265 mm (with stand) Approx: 982 x 643 x 124 mm (without stand) KDL-37xxxxx: Approx: 906 x 664 x 265 mm (with stand) Approx: 906 x 630 x 126 mm (without stand) KDL-32xxxxx: Approx: 790 x 583 x 214 mm (with stand) Approx: 790 x 549 x 119 mm (without stand) KDL-26P30xH: Approx: 657 x 506 x 214 mm (with stand) Approx: 657 x 472 x 121 mm (without stand) KDL-26T26xH: Approx: 657 x 506 x 214 mm (with stand) Approx: 657 x 453 x 121 mm (without stand) Mass: KDL-40xxxxx: Approx: 23,5 kg (with stand) Approx: 20,0 kg (without stand) KDL-37xxxxx: Approx: 21,0 kg (with stand) Approx: 18,0 kg (without stand) KDL-32xxxxx: Approx: 15,0 kg (with stand) Approx: 13,0 kg (without stand) KDL-26P30xH: Approx: 12,0 kg (with stand) Approx: 10,0 kg (without stand) KDL-26T26xH: Approx: 12,5 kg (with stand) Approx: 10,5 kg (without stand) Panel System LCD (Liquid Crystal Display) Panel TV System Depending on your country/region selection Analogue: B/G/H, D/K, L, I Digital: DVB-T Colour/Video System Analogue: PAL, SECAM NTSC 3.58, 4.43 (only Video In) Digital: MPEG-2 MP@ML Aerial 75 ohm external terminal for VHF/UHF Channel Coverage Analogue: 48.25 - 855.25 MHz Digital: VHF Band III (177.5 - 226.5 MHz) UHF E21 - E69 (474 - 858 MHz) Terminals / 1 21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, and TV audio/video output. / 2 (SMARTLINK) 21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, selectable audio/video output, and SMARTLINK interface. 3 Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i Y: 1 Vp-p, 75 ohms, 0.3V negative sync PB/CB: 0.7 Vp-p, 75 ohms PR/CR: 0.7 Vp-p, 75 ohms 3 Audio input (phono jacks) 500 mVrms Impedance: 47 kilo ohms HDMI IN 4, 5 Video: 1080i, 720p, 576p, 576i, 480p, 480i Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits PC (see table) Analogue audio (phono jacks): 500 mVrms, Impedance 47 kilohms (HDMI IN 4 only) 6 S video input (4-pin mini DIN) 6 Video input (phono jack) 6 Audio input (phono jacks) Audio output (Left/Right) (phono jacks) PC PC Input (15 Dsub) (see page 17) G: 0.7 Vp-p, 75 ohms, non Sync on Green B: 0.7 Vp-p, 75 ohms, non Sync on Green R: 0.7 Vp-p, 75 ohms, non Sync on Green HD: 1-5 Vp-p VD: 1-5 Vp-p PC audio input (minijack) i Headphones jack CAM (Conditional Access Module) slot 4 GB Sound Output Optional Accessories 10 W + 10 W (RMS) Wall-Mount Bracket SU-WL500 (KDL-40P30xH/ KDL-37P30xH/KDL-32P30xH). External speaker Wall-Mount Bracket SU-WL100 (KDL-26P30xH/ Impedance 16 ohm, max. 10W KDL-26T26xH). Design and specifications are subject to change without notice. PC Input Signal Reference Chart for PC Signals Horizontal (Pixel) Vertical (Line) Horizontal frequency (kHz) Vertical frequency (Hz) Standard VGA 640 480 31.5 60 VGA SVGA 800 600 37.9 60 VESA Guidelines XGA 1024 768 48.4 60 VESA Guidelines WXGA 1280 768 47.4 60 VESA 1280 768 47.8 60 VESA • This TV’s PC input does not support Sync on Green or Composite Sync. • This TV’s PC input does not support interlaced signals. • This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals, you will see the message “NO SYNC”. PC Input Signal Reference Chart for HDMI IN 4, 5 Signals Horizontal (Pixel) Vertical (Line) Horizontal frequency (kHz) Vertical frequency ...
Ce manuel est également adapté pour les modèles :TV - KDL-26P300H (10.87 mb)
TV - KDL-32P300H (10.87 mb)
TV - KDL-37P300H (10.87 mb)
TV - KDL-40P300H (10.87 mb)