Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
6 Tune the channels as follows: If you do not know the channel number (frequency) Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f. If you know the channel number (frequency) Press the number buttons to enter the channel number of the broadcast you want or your VCR/DVD recorder channel number. 7 Press to jump to “Confirm”, then press . Your changes have been saved. Repeat the above procedure to preset other channels manually. 42 GB Label Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected. To input characters, follow steps 1 to 3 of “Edit” (page 40). AFT Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality. You can adjust the fine tuning over a range of –15 to +15. When “On” is selected, the fine tuning is performed automatically. Audio Filter Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes. If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting “Off.” ~ • You cannot receive stereo or dual sound when “Low” or “High” is selected. LNA Improves the picture quality for individual channels in the case of very weak broadcast signals (noisy picture). If you cannot see any improvement in the picture quality even if you set to “On”, set this option to “Off” (factory setting). Skip Skips unused analogue channels when you press PROG +/– to select channels. (You can still select a skipped channel using the number buttons.) Decoder Shows and records the scrambled channel selected when using a decoder connected directly to scart connector / AV1, or to scart connector / / AV2 via a VCR/DVD recorder. ~ • Depending on the country selected for “Country” (page 6), this option may not be available. Confirm Saves changes made to the “Manual Programme Preset” settings. Digital Set-up Digital Tuning Digital Auto Tunes in the available digital channels. Tuning This option allows you to retune the TV after moving house, or to search for new channels that have been launched by broadcasters. For details, see step 6 of “5: Performing the initial set-up” (page 6). Using MENU Functions (Continued) 43 GB Programme Removes any unwanted digital channels stored on the TV, Sorting and changes the order of the digital channels stored on the TV. 1 Press F/f to select the channel you want to remove or move to a new position. You can also select a channel by pressing the number buttons to enter its three-digit channel number. 2 Remove or change the order of the digital channels as follows: To remove the digital channel Press . After a confirmation message appears, press G to select “Yes”, then press . To change the order of the digital channels Press g, then press F/f to select the new position for the channel and press G. 3 Press RETURN. Digital Manual Tunes the digital channels manually. This feature is available Tuning when “Digital Auto Tuning” is set to “Antenna.” 1 Press the number button to select the channel number you want to manually tune, then press F/f to tune the channel. 2 When the available channels are found, press F/f to select the channel you want to store, then press . 3 Press F/f to select the programme number where you want to store the new channel, then press . Repeat the above procedure to manually tune other channels. Subtitle Set-up Subtitle Setting When “For Hard Of Hearing” is selected, some visual aids may also be displayed with the subtitles (if TV channels broadcast such information). Subtitle Allows you to select the language of the subtitles. Language Audio Set-up Audio Type Switches to broadcast for the hearing impaired when “For Hard Of Hearing” is selected. Audio Language Selects the language used for a programme. Some digital channels may broadcast several audio languages for a programme. Audio Provides audio description (narration) of visual information if Description TV channels broadcast such information. Mixing Level* Adjusts the TV main audio and Audio Description output levels. Dynamic Range Compensates for differences in the audio level between different channels. Note that this function may have no effect for some channels. Optical Out Selects the audio signal that is output from the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the TV. Set to “Auto” when equipment compatible with Dolby Digital is connected, and set to “PCM” when non-compatible equipment is connected. z * This option is only available when “Audio Description” is set to “On.” Radio Display Displays the screen wallpaper when you listen to a radio broadcast. You can select the screen wallpaper colour, display a random colour...
Ce manuel est également adapté pour les modèles :TV - KDL-40W4710 (15.69 mb)
TV - KDL-46W4500 (15.69 mb)
TV - KDL-46W4710 (15.69 mb)
TV - KDL-52W4500 (15.69 mb)