Évaluations - 0, GPA: 0 ( )

Fabricant : Philips Taille : 2.61 mb Nom Fichier : Langue d'enseignement:

Select the channel number on your recorder. Set your recorder to record. See the handbook for your recorder. Note: Switching channel numbers on your TV does not disturb recording ! 12TVRecorderYPbPrVIDEORLETVRecorderYPbPrVIDEORLE 123 Press the SOURCE button repeatedly or select Source in the Settings menu (see p. 14) to select , TV, AV1, AV2, HDMI, Side AV , or PC, according to where you connected your devices. Press the cursor up/down. Press OK. 29 Trouble Shooting Tips Symptoms Items to Check and Actions to follow “Ghost” or double images • This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture. No power • Check that the TV’s AC power cord is plugged into the mains socket. • Unplug the television, wait for 60 seconds. Then re-insert plug into the mains socket and turn on the television again. No picture • Check antenna connections at the bottom of the TV to see if they are properly connected to the TV. • Possible broadcast station trouble. Try another channel. • Adjust the contrast and brightness settings. Try another auto picture setting. • Check the Closed Captions control. Some TEXT modes could block the screen. • Check if you selected the correct AV source. No picture and power switched on • Your TV has a protective mode in case there is too much heat build-up. Check the clearance around the vents of the device to be certain there are no blocking walls or cabinets which would limit the air flow. Picture position adjustment When displaying a High Definition signal from the YPbPr inputs or HDMI input, if necessary, you can adjust the picture position to the center of the screen with the cursor left/right or up/down buttons on the remote control. This may be needed due to slight differences in output signals from different brands and types of HD source boxes. Notes: Most High Def inition receiver boxes also have picture-positioning controls in their menu systems. If the TV cursor controls run out of range before the picture is correctly positioned, the receiver box controls will need to be adjusted. No photo, music or video play or in poor quality only • Check if the source complies with a supported code. No sound • Increase the VOLUME. • Check that the TV is not muted, press the MUTE button on the remote control. • When no signal is detected, the TV automatically switches off the sound. This is proper operation and does not indicate a malfunction. Good sound but poor color or no picture • Adjust the contrast, color, tint and brightness setting. Try another auto picture setting. Snowish picture and noise • Check the antenna connection. Television not responding to remote control • Check whether the batteries are working. Replace if necessary. • Clean the remote control sensor lens on the monitor. • Operating range between TV and the remote control should not be more than approximately twenty feet. • You can still use the buttons on the top of your TV. • Check if the remote control is in the correct mode. Control of accessory devices • The infrared signals of the screen may influence the reception sensibility of other peripherals Solution: replace the batteries of the remote control of other devices. E.g. keep away a wireless headphone from within a radius of approximately four feet. The software will not install Possibly the operating system is wrong. Go to to see which operating systems are supported. PC modes do not work • Check whether connections are correct. • Check whether the source is correctly selected. Press SOURCE button to select the correct source. • Check whether you have configured the computer on a compatible display resolution. Standby Your TV consumes energy less than 1w in the standby mode. After improper shutdown If your TV has been shutdown in an improper way (e.g. power drop, power cord plug out), starting up the TV again will take a longer time than usual. Miscellaneous See Extras, Specifications on this user manual. 30 Glossary Aspect Ratio The ratio between the width and height of the TV picture on the screen. In a normal TV set the aspect ratio is 4 to 3 (4:3). The new aspect ratio in HDTV is 16:9 which resembles the aspect ratio in a movie theatre (Widescreen). New TV systems support both 4:3 and 16:9 aspect ratio and can automatically switch between them. Audio Video (A/V) A term often used when discussing a channel on a TV receiver or on video equipment, which has been especially designed to accept VCR audio-video signals. This channel automatically activates special circuitry within the TV set to prevent picture distortion and skewing. It is also used for audio-video processors, which handle both types of signals. ATSC ATSC: Advanced Television Systems Committee. Formed to establish technical standards for advanced television systems, including digital high definition television (HDTV). CVBS Composite Video Baseband Signal. In broadcast television this refers to ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :